MidCal MINIs MidCal MINIs...filling the MINI void between Northern and Southern California. Visit the club site at midcalminis.com

A Big Thanks

Thread Tools
 
Search this Thread
 
Old Apr 27, 2006 | 08:55 AM
  #1226  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Originally Posted by rfish93705
OK I'm in.

So how many post do I need to get out of 1st, 2nd gear?
you need 51 to get into 2nd, and 151 to get into 3rd.
 
Reply
Old Apr 27, 2006 | 11:05 AM
  #1227  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Ok, chores are done for the day.

Am I allowed to come out and play now.

Ready to do some twisties.
 
Reply
Old Apr 27, 2006 | 11:09 AM
  #1228  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
See you up here.

Steve, since you don't know where my house is, where do you want to meet so I can take you there?

Originally Posted by Scooby03
Ok, chores are done for the day.

Am I allowed to come out and play now.

Ready to do some twisties.
 
Reply
Old Apr 27, 2006 | 11:14 AM
  #1229  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
I will meet you guys at Steve's house.
 
Reply
Old Apr 27, 2006 | 11:17 AM
  #1230  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
Sure thing. See you there at 12...

Originally Posted by Scooby03
I will meet you guys at Steve's house.
 
Reply
Old Apr 27, 2006 | 11:20 AM
  #1231  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Originally Posted by 1nf3rn0
Sure thing. See you there at 12...
I'm leaving now, just need fuel.
 
Reply
Old Apr 27, 2006 | 11:22 AM
  #1232  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
Might as well jus6t come to my place. You're gona be late.

Originally Posted by Scooby03
I'm leaving now, just need fuel.
 
Reply
Old Apr 27, 2006 | 11:36 AM
  #1233  
SRTech's Avatar
SRTech
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Originally Posted by 1nf3rn0
Might as well jus6t come to my place. You're gona be late.
Just meet me at my place. The time is not set in stone. Just tell your mom or dad we will be there between 1:00 and 1:30 if you see them.

Steve
 
Reply
Old Apr 27, 2006 | 11:49 AM
  #1234  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
k

Originally Posted by SRTech
Just meet me at my place. The time is not set in stone. Just tell your mom or dad we will be there between 1:00 and 1:30 if you see them.

Steve
 
Reply
Old Apr 27, 2006 | 12:05 PM
  #1235  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
Heading over now... I should get there around the same time as brad...
 
Reply
Old Apr 27, 2006 | 08:44 PM
  #1236  
SRTech's Avatar
SRTech
Former Vendor
Joined: May 2005
Posts: 3,480
Likes: 0
From: Oakhurst/Fresno, CA
Originally Posted by 1nf3rn0
Heading over now... I should get there around the same time as brad...
Well, we almost got it right. Fortunately, we all know the area well enough to find each other even if we don't connect on the first try.

Steve
 
Reply
Old Apr 27, 2006 | 09:32 PM
  #1237  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
Yup
Originally Posted by SRTech
Well, we almost got it right. Fortunately, we all know the area well enough to find each other even if we don't connect on the first try.

Steve
 
Reply
Old Apr 27, 2006 | 09:41 PM
  #1238  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
It was fun cutting holes in Steve's driveway today.
 
Reply
Old Apr 27, 2006 | 10:02 PM
  #1239  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
You did!?! I need pictures!

The steak and shrimp scampy was good

Originally Posted by Scooby03
It was fun cutting holes in Steve's driveway today.
 
Reply
Old Apr 27, 2006 | 10:04 PM
  #1240  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
We started cutting his driveway, then it got dark. I didn't leave there until 8.
Going to work on it again tomorrow. Come by after school, and check it out.
 
Reply
Old Apr 27, 2006 | 10:05 PM
  #1241  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
I will How thick was the concrete in the garage anyways?

Originally Posted by Scooby03
We started cutting his driveway, then it got dark. I didn't leave there until 8.
Going to work on it again tomorrow. Come by after school, and check it out.
 
Reply
Old Apr 27, 2006 | 10:07 PM
  #1242  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
we only cut down a little over an inch. We will finish cutting it tomorrow. Also do his hood.
 
Reply
Old Apr 27, 2006 | 10:09 PM
  #1243  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
What do you mean? How do you cut the driveway?

Originally Posted by Scooby03
we only cut down a little over an inch. We will finish cutting it tomorrow. Also do his hood.
 
Reply
Old Apr 27, 2006 | 10:11 PM
  #1244  
COR BLMY's Avatar
COR BLMY
6th Gear
Joined: Nov 2003
Posts: 2,349
Likes: 2
From: Concord, California
so I need to catch up

who has the USS installed ??

I have been playing with the rock crawler.
now 2 transfer cases (I will soon be able to crawl over anything

Will be passing by your way tomorrow on the way to Porsche North meet South in Morro Bay


Hope everyone is doing well
 
Reply
Old Apr 27, 2006 | 10:12 PM
  #1245  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
we put a diamond blade on his skill saw. Then you cut it about 1/2 inches at a time. We made 2 cuts, so far.
 
Reply
Old Apr 27, 2006 | 10:13 PM
  #1246  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Originally Posted by bpago
so I need to catch up

who has the USS installed ??

I have been playing with the rock crawler.
now 2 transfer cases (I will soon be able to crawl over anything

Will be passing by your way tomorrow on the way to Porsche North meet South in Morro Bay


Hope everyone is doing well
Very cool

All 3 of us now have the M7-USS installed.
 
Reply
Old Apr 27, 2006 | 10:14 PM
  #1247  
COR BLMY's Avatar
COR BLMY
6th Gear
Joined: Nov 2003
Posts: 2,349
Likes: 2
From: Concord, California
so


does it work as good as Blakes WINGS ???

just messin with you inferno
 
Reply
Old Apr 27, 2006 | 10:16 PM
  #1248  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
Better, but its different. I'm glad i have the uSS instead.
 
Reply
Old Apr 27, 2006 | 10:16 PM
  #1249  
Scooby03's Avatar
Scooby03
Thread Starter
|
Former Vendor
Joined: Jan 2005
Posts: 6,314
Likes: 0
From: Fresno,Ca
Originally Posted by bpago
so


does it work as good as Blakes WINGS ???
They seem to work well, becouse of it Blake had to sell his wings

The 3 of us are doing an autocross in Hollywood park in june. There we will try them out.
 
Reply
Old Apr 27, 2006 | 10:17 PM
  #1250  
1nf3rn0's Avatar
1nf3rn0
6th Gear
iTrader: (2)
Joined: Apr 2005
Posts: 6,731
Likes: 3
There you can. I have already backroad tested them and I am very happy.

Originally Posted by Scooby03
They seem to work well, becouse of it Blake had to sell his wings

The 3 of us are doing an autocross in Hollywood park in june. There we will try them out.
 
Reply



All times are GMT -7. The time now is 06:51 PM.