Used set of Motegi FF6 wheels (17x7 anthracite with polished lip) - 7/10 in condition (minor scratches from frequent wheel changes by the previous owner), with 215/45/17 Bridgestone RE92A all-seasons mounted. Tires have only 3-5K miles on them and are non-run-flat. These wheels were bought second hand and the tires mounted new after the car was delivered last winter since the car had summer tires from the factory.





Local pickup preferred, but willing to ship as well. Asking $500 for the mounted set. Willing to sell wheels alone for $300. Email is best: drhunter673 @ gmail .com

 

email sent!
By the way, do you have any close up pictures of the wheels??
Cheers
Stephen

 

replied!

And replied again with closer pics!

 

to the top

 

what is the weight of the wheel/tire?
shipping to 05495?

Thanks:impatient

 

Wheel is ~ 19lbs and tire is 23lbs, so shipping weight should be about 43-44. Call it $60 through Fedex.

 

assume that is per one?
what is your ZIP ?

thanks j

 

weight is per tire and per wheel (since some people ask because of performance reasons vs. shipping), while the shipping price was for everything to your door. My zip is 20176.

 

What have been your experiences with the Potenza's? They aren't getting many favorable reviews on Tire Rack. Nice looking wheels though

BTW, jcs - old 05477 guy here!

 

there are certainly better tires out there for the money, but as long as you don't expect them to perform like real snow tires or summer performance tires, you'll be fine. We had the same models on the WRX, on a older Civic and on the Subaru Legacy (where these came from)....fairly common OEM rubber. Capable, but not standouts.

 

do the wheels come with lugnuts/bolts ? or did you use original lug bolts? would mind to e-mail me closer pictures of the wheels & scratches? Will PM you e- mail address thanks, J

 

I am using SplineDrives on there now (did a lug conversion), which will stay for the next set of wheels. Somewhere in the garage, I have a bag of brand new lugs/bolts that came with the ASA wheels from TireRack. If I can find those, I'll include them. Not sure if the OEM ones work or not.

 

bump to the top. OEM bolts should work fine...I checked them on the other three sets of wheels sitting in the garage (ASA, Enkei and Rota) and they sit correctly. Didn't find the bag from TireRack I thought I had, probably because they only sent me hub rings (included) and no lugs. :D

 

Mondy bump

 

Make an offer....no room to keep these

 

MiniMargie--

I'm still waiting for my pics.

 

I sincerely apologize....I sent pics to quite a few people and screenames don't always = email addresses. Re-sent.

 

oem lugs will not fit... i tried them on my old motegi ff6s

 

your email address just bounced back to me.... " Mailbox disabled for this recipient "

 

good to know, thanks. I'll include new bolts if sold at the price listed.

 

Despite an ice storm overnight, the temps got above 50F today so the Mini finally got a bath. Up close pics of all wheels uploaded here



Photobucket automatically sized these down. I can email individual pics if you PM me your email address...1600x1200 and 800kb each.

 

Monday bump - make an offer....I'll probably take it.

 

What's hub and/or do they have centering rings?

Shipping to 27604?

 

they have rings included. Last quote I did was to VT for $60, so NC should be a bit less.

 

ttt