I am selling everything you need, except the wirring harness but with the connectors for the radio and the amplifier, to upgrade your factory audio system with the factory HK upgrade. This will includ the head unit, 2 6.5" components, 2 tweeters, and 2 6x9 dual voice coil woffers, and the amplifier. Starting at $300 obo.

 

Come up with a wire schematic on how to wire up the amp and speakers to the factory head unit and you have a deal

 

I have complete upgrade instructions and the full wiring schematic available for whoever buys this lot (you'll need it)!

You'll also need the speaker wiring connectors... some are different than the base setup.

Pls email (not PM) for details.
Mike
two00mph@aol.com

 

You can order the wires in Germany.

I got the full harness and door wires thru a BMW dealer in Germany.

Alex

 

I will photo copy the wirring diagram out of the Bentley manual or you can get it from 200. I have the connectors and it is ready to be wirred up. PM me for payment. And you will be HK equiped in just a few days.

 

Would you need to do all that complicated wiring if you were using an aftermarket deck?

 

If you want an aftermarket head unit and you don't have HK, deciding to put HK in with the aftermarket HU would be a double nightmare!
Just go aftermarket HU *and* amp and speakers.

 

Spillman - did you have the 'dreaded' door rattle?

 

Yes I did and tried several things. What I ended up doing was dynamatting the entire door and spraying the inside of the door pannel with dynashield. A bit over kill but it worked.