JCW Ordered... And now I have to change it :)
#1
Ordered... And now I have to change it :)
I ordered my new F56 JCW MINI yesterday, She will be replacing my current R58 Cooper S Coupe (Lady Tardy). Then I saw MayTulip32's post with the spec sheet, and specifically the Black LED Lights and had to eMail my MA to see if I can get the change made. :p
I have a list of aftermarket stuff I'll be adding or changing once I receive her.
I have a list of aftermarket stuff I'll be adding or changing once I receive her.
#2
I ordered my new F56 JCW MINI yesterday, She will be replacing my current R58 Cooper S Coupe (Lady Tardy). Then I saw MayTulip32's post with the spec sheet, and specifically the Black LED Lights and had to eMail my MA to see if I can get the change made. :p
I have a list of aftermarket stuff I'll be adding or changing once I receive her.
I have a list of aftermarket stuff I'll be adding or changing once I receive her.
#3
I think that ECS sells these piece for a lot less than the $465 that Mini charges. IL'd let it go thru the way it is and then change when you receive the MINI. Might even get the MINI dealership to put them on for you, then you have the chrome trim rings if you would want to do the chrome look later. Just a thought. I'm thinking of going body color on the trim rings when I eventually get my next JCW.
#5
These will not all happen at once, but here is the current list of Mods I'll be making to my new JCW:
JCW Mods
https://www.ecstuning.com/ES2805464/
Spoiler Extensions
https://www.ecstuning.com/ES2805463/
Front Spiltter
http://www.nm-eng.com/344/0/0/3181/n...m-tie-bar.html
Front Brace
http://www.nm-eng.com/344/0/0/3113/n...ntake-kit.html
CAI
http://www.nm-eng.com/344/0/0/3128/n...er-module.html
Power Module
http://www.nm-eng.com/344/0/0/3107/n...pring-kit.html
Lowering Springs
http://www.nm-eng.com/344/0/0/3089/n...ght-wheel.html
18” Wheels
https://www.ecstuning.com/ES2731080/...s-0aAofQ8P8HAQ
12mm Spacers
http://www.outmotoring.com/door-hand...oss-black.html
Black Door Handle Covers
http://www.outmotoring.com/gas-lid-c...lack-gen3.html
Petrol Cap Cover
http://www.outmotoring.com/license-p...-slimline.html
Black License Plate Surround
http://www.outmotoring.com/out-motor...gen2-gen3.html
Beltline Tape - Black
http://www.outmotoring.com/mini-coop...y-antenna.html
Stubby Aerial
http://www.outmotoring.com/clear-sid...cent-gen3.html
Black Scuttles
http://www.remususa.com/epages/remus...0CB%20SPORT%22
Remus Exhaust
JCW Mods
https://www.ecstuning.com/ES2805464/
Spoiler Extensions
https://www.ecstuning.com/ES2805463/
Front Spiltter
http://www.nm-eng.com/344/0/0/3181/n...m-tie-bar.html
Front Brace
http://www.nm-eng.com/344/0/0/3113/n...ntake-kit.html
CAI
http://www.nm-eng.com/344/0/0/3128/n...er-module.html
Power Module
http://www.nm-eng.com/344/0/0/3107/n...pring-kit.html
Lowering Springs
http://www.nm-eng.com/344/0/0/3089/n...ght-wheel.html
18” Wheels
https://www.ecstuning.com/ES2731080/...s-0aAofQ8P8HAQ
12mm Spacers
http://www.outmotoring.com/door-hand...oss-black.html
Black Door Handle Covers
http://www.outmotoring.com/gas-lid-c...lack-gen3.html
Petrol Cap Cover
http://www.outmotoring.com/license-p...-slimline.html
Black License Plate Surround
http://www.outmotoring.com/out-motor...gen2-gen3.html
Beltline Tape - Black
http://www.outmotoring.com/mini-coop...y-antenna.html
Stubby Aerial
http://www.outmotoring.com/clear-sid...cent-gen3.html
Black Scuttles
Remus Exhaust
The following users liked this post:
ECSTuning (03-13-2019)
#6
These will not all happen at once, but here is the current list of Mods I'll be making to my new JCW:
JCW Mods
https://www.ecstuning.com/ES2805464/
Spoiler Extensions
https://www.ecstuning.com/ES2805463/
Front Spiltter
http://www.nm-eng.com/344/0/0/3181/n...m-tie-bar.html
Front Brace
http://www.nm-eng.com/344/0/0/3113/n...ntake-kit.html
CAI
http://www.nm-eng.com/344/0/0/3128/n...er-module.html
Power Module
http://www.nm-eng.com/344/0/0/3107/n...pring-kit.html
Lowering Springs
http://www.nm-eng.com/344/0/0/3089/n...ght-wheel.html
18” Wheels
https://www.ecstuning.com/ES2731080/...s-0aAofQ8P8HAQ
12mm Spacers
http://www.outmotoring.com/door-hand...oss-black.html
Black Door Handle Covers
http://www.outmotoring.com/gas-lid-c...lack-gen3.html
Petrol Cap Cover
http://www.outmotoring.com/license-p...-slimline.html
Black License Plate Surround
http://www.outmotoring.com/out-motor...gen2-gen3.html
Beltline Tape - Black
http://www.outmotoring.com/mini-coop...y-antenna.html
Stubby Aerial
http://www.outmotoring.com/clear-sid...cent-gen3.html
Black Scuttles
MINI Cooper S F56 with REMUS cat-back sport exhaust system ft. remote control valve - YouTube
http://www.remususa.com/epages/remus...0CB%20SPORT%22
Remus Exhaust
JCW Mods
https://www.ecstuning.com/ES2805464/
Spoiler Extensions
https://www.ecstuning.com/ES2805463/
Front Spiltter
http://www.nm-eng.com/344/0/0/3181/n...m-tie-bar.html
Front Brace
http://www.nm-eng.com/344/0/0/3113/n...ntake-kit.html
CAI
http://www.nm-eng.com/344/0/0/3128/n...er-module.html
Power Module
http://www.nm-eng.com/344/0/0/3107/n...pring-kit.html
Lowering Springs
http://www.nm-eng.com/344/0/0/3089/n...ght-wheel.html
18” Wheels
https://www.ecstuning.com/ES2731080/...s-0aAofQ8P8HAQ
12mm Spacers
http://www.outmotoring.com/door-hand...oss-black.html
Black Door Handle Covers
http://www.outmotoring.com/gas-lid-c...lack-gen3.html
Petrol Cap Cover
http://www.outmotoring.com/license-p...-slimline.html
Black License Plate Surround
http://www.outmotoring.com/out-motor...gen2-gen3.html
Beltline Tape - Black
http://www.outmotoring.com/mini-coop...y-antenna.html
Stubby Aerial
http://www.outmotoring.com/clear-sid...cent-gen3.html
Black Scuttles
MINI Cooper S F56 with REMUS cat-back sport exhaust system ft. remote control valve - YouTube
http://www.remususa.com/epages/remus...0CB%20SPORT%22
Remus Exhaust
What about the JCW Pto rear diffuser? That'll be my first change!
The following users liked this post:
ECSTuning (03-13-2019)
#7
Trending Topics
#8
#9
Thats a good list you have going. I liked the JCW rear pro diffuser once i saw it in person. Some people are painting the edges also to have the diffuser a more pronounced look. 51192339046
https://www.northamericanmotoring.co...o-parts-2.html
https://www.northamericanmotoring.co...-diffuser.html
https://www.northamericanmotoring.co...o-parts-2.html
https://www.northamericanmotoring.co...-diffuser.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 12-07-2015 at 01:58 PM.
#11
Not too far away, what port is it going to ? SC port seems to be the quickest. NJ and Port Hueneme, CA can get a little backed up sometimes in the VDC.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 10-21-2015 at 05:05 AM.
#12
Port Hueneme, CA.
As I said in an earlier post, it will be almost 4 years to the day that my MINI Coupe S showed up. She then spent Thanksgiving at Borla being fitted for a racing exhaust.
First round of Mods ordered - The easy stuff. Once the break in period is over then the springs, CAI, etc with be ordered.
I may changed my mind and the rear diffuser, although at $700, I might have to sell a limb or two.
As I said in an earlier post, it will be almost 4 years to the day that my MINI Coupe S showed up. She then spent Thanksgiving at Borla being fitted for a racing exhaust.
First round of Mods ordered - The easy stuff. Once the break in period is over then the springs, CAI, etc with be ordered.
I may changed my mind and the rear diffuser, although at $700, I might have to sell a limb or two.
#15
Hope for smooth sailing and safe travels.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#16
She arrived in port last week and is at the VDC. I contacted the dealer to have them fit:
JCW Pro Coil Overs
JCW Pro Diffuser
JCW Pro Front Body Extensions
JCW Pro Rear Spoiler Extensions
JCW Exhaust with Chrome Tips (the one with the flap)
I hope the see the car before the end of the month, but I am not holding my breath.
After I get it, I'll get the windows tinted, then onto the other mods.
Stay tuned.
JCW Pro Coil Overs
JCW Pro Diffuser
JCW Pro Front Body Extensions
JCW Pro Rear Spoiler Extensions
JCW Exhaust with Chrome Tips (the one with the flap)
I hope the see the car before the end of the month, but I am not holding my breath.
After I get it, I'll get the windows tinted, then onto the other mods.
Stay tuned.
#17
Confirmed today - There is now a separate part number just for the JCW Pro Exhaust. Once I pick up the car next Saturday I will post here. Approximate cost is $1690 plus additional for the exhaust tips. This is not the fitted price. Labour is extra.
Last edited by TheGeekGuy; 11-22-2015 at 08:19 AM.
#19
That seems cheap for all you are having done. Hopefully, the labor charges won't give you a heart attack (or is that price just for the exhaust?)! I was not even made aware of all the JCW Pro goodies when I ordered my 2015 JCW (which I may have gotten), but back then the F56 JCW was so new the dealer may not have really known about all the various modifications.
All I ended up with "accessory-wise" was the Black LED Driving Lights, which I love! Please post up pics of your new baby when it finally is in your hands!
Good Luck,
John
#20
That seems cheap for all you are having done. Hopefully, the labor charges won't give you a heart attack (or is that price just for the exhaust?)! I was not even made aware of all the JCW Pro goodies when I ordered my 2015 JCW (which I may have gotten), but back then the F56 JCW was so new the dealer may not have really known about all the various modifications.
All I ended up with "accessory-wise" was the Black LED Driving Lights, which I love! Please post up pics of your new baby when it finally is in your hands!
Good Luck,
John
All I ended up with "accessory-wise" was the Black LED Driving Lights, which I love! Please post up pics of your new baby when it finally is in your hands!
Good Luck,
John
I chatted with the Parts and Service Managers about putting up a display of the parts, etc but for some weird reason they don't seem that interested Maybe they don't feel there is money to be made from the parts? I dunno...
Anyhow, part number and images will follow after Saturday (yes, they need it all week to fit all this stuff). There are additional mods I'll be making, but I'll most likely wait until the New Year for those.
#21
What part # ?
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#22
Not sure if you're asking for the part number itself, or what part I will be getting the part number for... Assuming the later, the part number is for the JCP Pro Exhaust by itself without the rest of the JCW kit that is fitted to a Cooper S. I was told by my MA, as well as the Parts and Service Manager that there is a separate part number now.
#23
ah, yes, just thought you found another part number. The one is see is still blocked for the rear section only.
18302359645
18302359645
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#24