Interior/Exterior New Stripes! your opinion?
#5
Originally Posted by goaljnky
I would've moved it another 2-3 inches towards the center, but otherwise lookg good. Very unique.
But as for the cut and coloring of the stripes, I think it's pretty awesome.
#7
Trending Topics
#9
#10
#13
Hi, my opinion is (no offense) I like the symmetric looks more than just on one side. Like some folks mentioned already, it is a bit over on the side by the way.
Besides, I think the bonet one passes the upper grill, extends all the way to the bumper (and its black color), visually, catch my focus on the strip more than the car, so a bit hard to focus. Don't know it is the illusion from the curve of the upper grill (or the angle you shot this pic), seems the width of the part below and top of the grill is not the same.
Having said that, the boot one looks good and blend well into it.
That is my opinion.
Besides, I think the bonet one passes the upper grill, extends all the way to the bumper (and its black color), visually, catch my focus on the strip more than the car, so a bit hard to focus. Don't know it is the illusion from the curve of the upper grill (or the angle you shot this pic), seems the width of the part below and top of the grill is not the same.
Having said that, the boot one looks good and blend well into it.
That is my opinion.
#15
6th Gear
iTrader: (1)
on ur boot remove it off chrome part in the lower bumper insert (if that's a chrome insert not sure) that 82& that chick is there a subliminal message, naw just jokin'. on that graphic, i would place it higher closer to ur wind sreen & cover over the chrome (that goes all around the car) so its all black together with wind screen, i feel it might balance better since ur tail lamp is wider in the bottom thinner on top. also if U do move pin stripe over remove boot latch & place stripe under it.
& on ur front pretty much what everybody else has said about moving it over abit & changin' the thin strip to oposite side & make it a bit thinner as well. take it off ur' chrome leave it on the whole bumper (top edge) but not on any of the chrome. other than alllll that it looks pretty tight. //peace
& on ur front pretty much what everybody else has said about moving it over abit & changin' the thin strip to oposite side & make it a bit thinner as well. take it off ur' chrome leave it on the whole bumper (top edge) but not on any of the chrome. other than alllll that it looks pretty tight. //peace
Originally Posted by inkdripz
designed applyed and cut my own stripes this weekend and i would really like some feedback.
before.
after.
what do you guys/ladies think?
before.
after.
what do you guys/ladies think?
#16
Join Date: Jul 2002
Location: Weeblegabber West (aka WLA)
Posts: 36,087
Likes: 0
Received 3 Likes
on
1 Post
Originally Posted by joker
take it off ur' chrome leave it on the whole bumper (top edge) but not on any of the chrome. other than alllll that it looks pretty tight. //peace
Clover
Thread
Thread Starter
Forum
Replies
Last Post