Interior/Exterior Decal Websites?
Thread Starter
|
6th Gear
Joined: Feb 2011
Posts: 1,785
Likes: 0
From: Fairfax, VA
Decal Websites?
Hey I'm looking fo a good decal website that let's you preview the decals on a mini before you buy them or even better. I'll describe the stripes I'm looking for and see if y'all seen them out there on the web. I'm looking for racing stripes that are matte black from the bonnet to boot with red pinstripes outlining the outside and inside of the stripes. Thanks in advance
Oh and I found this on the forum: these are the stripes I wanted but instead of glossy black I want matte black (the clubman about 3 quarters of the way down on the page)
https://www.northamericanmotoring.co...-thread-9.html
And I would like to get them the same matte black as the black JCW on this page
https://www.northamericanmotoring.co...-thread-7.html
Anyone got any ideas?
Oh and I found this on the forum: these are the stripes I wanted but instead of glossy black I want matte black (the clubman about 3 quarters of the way down on the page)
https://www.northamericanmotoring.co...-thread-9.html
And I would like to get them the same matte black as the black JCW on this page
https://www.northamericanmotoring.co...-thread-7.html
Anyone got any ideas?
Last edited by Achilles honor; Mar 13, 2011 at 10:21 PM. Reason: Links
Last edited by Achilless; Mar 13, 2011 at 06:05 AM.
2nd Gear
Joined: Jan 2010
Posts: 86
Likes: 0
From: San Diego
Thread Starter
|
6th Gear
Joined: Feb 2011
Posts: 1,785
Likes: 0
From: Fairfax, VA
Sry I'm on my iPhone and can't see the website cause it's flashplayer so do they do stripes and stuff?
Trending Topics
3rd Gear
Joined: Jan 2011
Posts: 179
Likes: 0
From: Raleigh, NC
http://www.motoringdesigns.com can do that for you, might want to compare their prices. They of course don't have a way to preview them on your car online, but they can send you samples of the vinyl. It is run by two guys from THMMC (that club you signed up for yesterday) so you know they will treat you well. (Twister- Mark & N2MINI- Bryan) They did an excellent job with our stripes!
And if you go down to Winston Salem for Mark to install them, there are some really nice twisties around there! Just getting there would be fun.
And if you go down to Winston Salem for Mark to install them, there are some really nice twisties around there! Just getting there would be fun.
3rd Gear
Joined: Jan 2011
Posts: 179
Likes: 0
From: Raleigh, NC
I just wanted to add... no matter where you get your stripes, it might be a good idea to request samples first. When I was planning out what to do with mine, I was iffy about the roof stripes. Bryan sent me several swatches of blue for me to pick which ones looked best. It really helps you make decisions when you see what things are going to look like next to your paint.
Thread Starter
|
6th Gear
Joined: Feb 2011
Posts: 1,785
Likes: 0
From: Fairfax, VA
I just wanted to add... no matter where you get your stripes, it might be a good idea to request samples first. When I was planning out what to do with mine, I was iffy about the roof stripes. Bryan sent me several swatches of blue for me to pick which ones looked best. It really helps you make decisions when you see what things are going to look like next to your paint.
3rd Gear
Joined: Jan 2011
Posts: 179
Likes: 0
From: Raleigh, NC
From Mark & Bryan, as I said above. I was referred to them when I asked around on our local club forums about who I should go to... I just PM'd Bryan (N2MINI) on THMMC's forum to discuss what I wanted, he is the one that cuts the vinyl. They have done lots of graphics for people in our club, so I have seen many examples of their work. They do good stuff.
First I looked at a ton of photos on NAM and google, made a decision, then told him what style I wanted (double stripe with pins) and that I wanted gloss black with contrasting blue on the roof. He sent samples of the blue, and I responded which which worked best and what measurements I wanted. As soon as I made my final decision he cut my stripes, and the price was very reasonable.
First I looked at a ton of photos on NAM and google, made a decision, then told him what style I wanted (double stripe with pins) and that I wanted gloss black with contrasting blue on the roof. He sent samples of the blue, and I responded which which worked best and what measurements I wanted. As soon as I made my final decision he cut my stripes, and the price was very reasonable.
Thread Starter
|
6th Gear
Joined: Feb 2011
Posts: 1,785
Likes: 0
From: Fairfax, VA
From Mark & Bryan, as I said above. I was referred to them when I asked around on our local club forums about who I should go to... I just PM'd Bryan (N2MINI) on THMMC's forum to discuss what I wanted, he is the one that cuts the vinyl. They have done lots of graphics for people in our club, so I have seen many examples of their work. They do good stuff.
First I looked at a ton of photos on NAM and google, made a decision, then told him what style I wanted (double stripe with pins) and that I wanted gloss black with contrasting blue on the roof. He sent samples of the blue, and I responded which which worked best and what measurements I wanted. As soon as I made my final decision he cut my stripes, and the price was very reasonable.
First I looked at a ton of photos on NAM and google, made a decision, then told him what style I wanted (double stripe with pins) and that I wanted gloss black with contrasting blue on the roof. He sent samples of the blue, and I responded which which worked best and what measurements I wanted. As soon as I made my final decision he cut my stripes, and the price was very reasonable.
Thread Starter
|
6th Gear
Joined: Feb 2011
Posts: 1,785
Likes: 0
From: Fairfax, VA
ive decided to take the oem rims and tires and just get the brake caliper red
Thread
Thread Starter
Forum
Replies
Last Post
M7Speed
1st Gen Countryman (R60) Talk (2010-2015)
3
Jul 10, 2018 09:26 AM