Interior/Exterior dome light?
#1
dome light?
--Ive posted this already in stock problems but no one has been able to help me so i'd figure i would try my luck here.
I replaced the Dome lights with a 39mm LED festoon. it was kind of to big so i bent the two little metal connectors to fit it. It worked fine but last night i noticed the light flickering. I went to go adjust it and one of hte metal arms snapped.
What are those metal connectors called and where could i pick one up..im assuming its a very common part at stores like home depot.
I replaced the Dome lights with a 39mm LED festoon. it was kind of to big so i bent the two little metal connectors to fit it. It worked fine but last night i noticed the light flickering. I went to go adjust it and one of hte metal arms snapped.
What are those metal connectors called and where could i pick one up..im assuming its a very common part at stores like home depot.
#3
You may have to just solder it back together. If the LED dome light you got doesn't fit right try our WMW dome light it works great.
http://www.waymotorworks.com/product...3&cat=0&page=1
http://www.waymotorworks.com/product...3&cat=0&page=1
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
#7
Trending Topics
#9
When connecting LED lights instead of the regular tungsten bulbs, I learned that the MINI system doesn't like the very, very low current draw and therefore causes the LEDs to flicker. I did a thread several years ago when putting LED strips in the boot. I had to add a resistor, about 1000 ohms I think to bring the total resistance up to something the MINI computer liked.
Just a suggestion.
YD
Just a suggestion.
YD
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Interior/Exterior Products
2
09-28-2021 01:16 PM
ECSTuning
Interior/Exterior Products
0
08-21-2015 12:58 PM
ECSTuning
Vendor Classifieds
0
08-21-2015 12:58 PM
ECSTuning
Vendor Announcements
0
08-19-2015 12:51 PM