Can the toggle rings/dividers be removed without removing the whole toggle switch panel? I would like to remove to paint orange to match my interior.

Thanks for the help and any hints.

 

NO ...
not without damage
they are cliped in and a bit spring loaded.

 

 

Now you've gone and done it. I've come down with "toggle envy."

 

Glad I could give you something to shoot for

 

Agreed. They're very easy to remove with the panel off (first unclip the front section from the rear) but they're just not designed to be removed in place.

It's not tough to remove the panel - see Ian's instructions here.

You might want to ask Ian or post an ad in Marketplace - many toggle panels have been cannibalized for their toggles. Might let you paint the toggle rings in advance and have them ready to go when you pop out the toggle panel.

 

I did purchase a toggle bank for that reasion...

Hmmmm .... I just may have some seperators.

 

Thanks for the feedback/suggestions. Toggle envy x2!!

 

Maybe mine have been different, but I haven't had any trouble removing the rings from 2 MINIs. Just thread a shoelace or somesuch thru the ring and YANK! They pop off without damage (in my experience). YMMV

 

That must be a big shoelace and a BIG tug

 

Well, I finally did it. No shoestring required - it was actually quite easy to do. Take a look at the gallery and let me know what you think.

https://www.northamericanmotoring.co...//ppuser/31048