Interior/Exterior Teaser - what an R56 should look like
#1
#5
very nice! The drop will make a world of difference
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
#7
Trending Topics
#10
#11
#13
Jeez, and I swear nobody reads entire posts these days...
HE SAID COILOVERS GO ON SATURDAY MORNING!!!
#16
#17
#18
Thanks for all the thoughts and suggestions guys! The beltline and gas cap will be done at some point, I played around with tape and don't have the patience for it; I will just remove, paint, and clearcoat in the coming weeks (this weekend and next is devoted to lowering and sorting out suspension). The door handles will remain shiny to set off the lips.
The big decision is what to do with the taillights - probably going to be smoked but I am not sure what to do with the surrounds (black, body-color, or leave them chrome) and with the chrome covers for the headlight washers (probably leave them chrome). Any and all suggestions will be eagerly entertained.
The big decision is what to do with the taillights - probably going to be smoked but I am not sure what to do with the surrounds (black, body-color, or leave them chrome) and with the chrome covers for the headlight washers (probably leave them chrome). Any and all suggestions will be eagerly entertained.
#19
The big decision is what to do with the taillights - probably going to be smoked but I am not sure what to do with the surrounds (black, body-color, or leave them chrome) and with the chrome covers for the headlight washers (probably leave them chrome). Any and all suggestions will be eagerly entertained.
Looking good so far. I'd leave the headlight washers chrome; they blend in with the lights. I'd also do the taillight bezels body color to match the headlight rings.
#20
Don't cry...it was meant to be a joke. Hence the sticking out of the tongue and all...
#22
Anyway, it served a purpose to motivate the owner to speed up the timeframe on lowering... so .
#24
So, we started the install last night. Swapped out the rears without issue (had to reuse OEM tophats), and moved on to the fronts. The front assembly was like that of my M3, so although a bit annoying to work on, at least we were familiar with it. After removing the front, we realized that the camber plates on the new coilovers were the wrong size.
Looks like we'll be finishing this project on Wednesday, at which point JIC/Cross will send over different front assemblies.
Looks like we'll be finishing this project on Wednesday, at which point JIC/Cross will send over different front assemblies.
#25
I considered going black, I think diabolito's MCS looks really nice with them, but ultimately I felt that going body-color would look more integrated into the look of the car.
Last edited by ygblat; 08-04-2007 at 10:09 AM.