Interior/Exterior Stella 95% WHITED-out! (Warning, LOTSO pics)
#1
Stella 95% WHITED-out! (Warning, LOTSO pics)
Stella + Ellis = Stellis
Whited-out headlight rings and emblem
Whited-out belt-line, emblem, chrome piece above LP, white inserts, and Euro-style taillights
Checking her out
Front
Bird's Eye view of front
Of Back
Full Frontal
Vinyl-wrapped headlight
35% tint all the way around
Last, but not least, red and white centercaps
This post is a way to say thanks back to the NAM community for these great ideas--couldn't have thought of them without you! Special thanks to Bryan for the how-to on whiting out the emblems and having a hell of a time prying them off in the cold and thanks to the rest of the guys and gals who were there that night ... it means a lot...aw gawd i'm gonna cry
As always, if anyone has questions about the car or need to know where to get these mods installed (I had a ton), I'm only a PM away!!
Whited-out headlight rings and emblem
Whited-out belt-line, emblem, chrome piece above LP, white inserts, and Euro-style taillights
Checking her out
Front
Bird's Eye view of front
Of Back
Full Frontal
Vinyl-wrapped headlight
35% tint all the way around
Last, but not least, red and white centercaps
This post is a way to say thanks back to the NAM community for these great ideas--couldn't have thought of them without you! Special thanks to Bryan for the how-to on whiting out the emblems and having a hell of a time prying them off in the cold and thanks to the rest of the guys and gals who were there that night ... it means a lot...aw gawd i'm gonna cry
As always, if anyone has questions about the car or need to know where to get these mods installed (I had a ton), I'm only a PM away!!
Last edited by ellistotle; 05-25-2007 at 06:57 PM.
#7
Trending Topics
#10
#12
Looks great - I really like the white beltline. I'd leave the aero grille black, though. Both the bonnet stripes and the headlamp trim rings are fairly strong front-to-rear elements, and I'd be afraid that having the white longitudinal bonnet stripes leading right up into a white grille (which is a strong lateral element) might be jarring, and a little bit much.
Basically, you've got a lot of contrast between various elements on your car, but most of them run front-to-back. The rear of the car is the exception, but you've got the rear spoiler, beltline, hatch handle and bumper inserts ALL running laterally, with no strong longitudinal elements back there, so it works well.
I *would* replace the "Pull to inflate" decal with the white version, though! Also, looking at the side of the car, there seems to be a lot of unbroken red, considering how many contrasting elements you have on the front, top, and rear of the car. Have you considered some kind of white stripe/graphic running front-to-rear just above the rocker panel?
Basically, you've got a lot of contrast between various elements on your car, but most of them run front-to-back. The rear of the car is the exception, but you've got the rear spoiler, beltline, hatch handle and bumper inserts ALL running laterally, with no strong longitudinal elements back there, so it works well.
I *would* replace the "Pull to inflate" decal with the white version, though! Also, looking at the side of the car, there seems to be a lot of unbroken red, considering how many contrasting elements you have on the front, top, and rear of the car. Have you considered some kind of white stripe/graphic running front-to-rear just above the rocker panel?
Last edited by ScottRiqui; 05-25-2007 at 10:24 PM.
#14
#16
I think the white grill would be a total hit with the road you have went so far.
You could tape off the front portion of the honeycomb and paint the rest of the grill from the back, then wrap the black grill trim. You could even plug everyother honeycomb hole and give it the checkered look. When you were done it would still have the black to tie it in, but would give it the cool look that you have done so well with.
You could tape off the front portion of the honeycomb and paint the rest of the grill from the back, then wrap the black grill trim. You could even plug everyother honeycomb hole and give it the checkered look. When you were done it would still have the black to tie it in, but would give it the cool look that you have done so well with.
#18
#20
#24
i agree with RKW. maybe some white cowl hood vent scoops?
like this http://images.google.com/imgres?imgu...%3Den%26sa%3DG
or this
but in white of course
like this http://images.google.com/imgres?imgu...%3Den%26sa%3DG
or this
but in white of course
Last edited by familiarstranger; 05-26-2007 at 02:01 PM.