How To Preferred Manual

Thread Tools
 
Search this Thread
 
Old Jan 11, 2020 | 09:22 AM
  #1  
masterdrago's Avatar
masterdrago
Thread Starter
|
1st Gear
Joined: Jan 2020
Posts: 18
Likes: 1
From: SE Texas
Preferred Manual

New to us Mini R60 45k miles. Wanting to do basic service but having hard time finding info on tranny maintenance. Looked around found a large number of manuals for sale. Can anyone recommend a preferred edition for a guy wanting only to do shade tree general stuff - oil changes, lube, etc. Not finding much on the forums. Especially for the tranny drain, fill. My Ram has an Aisin that gets partial drain-fill at 30k miles, then at 60k, a full filter full drain-fill. Is that similar on the 2016 Countyman S All4 transmission?
 
Reply
Old Jan 15, 2020 | 12:10 PM
  #2  
Red90's Avatar
Red90
1st Gear
Joined: Dec 2019
Posts: 25
Likes: 5
https://www.newtis.info/tisv2/a/en/
 
Reply
Old Jan 15, 2020 | 01:32 PM
  #3  
masterdrago's Avatar
masterdrago
Thread Starter
|
1st Gear
Joined: Jan 2020
Posts: 18
Likes: 1
From: SE Texas
Originally Posted by Red90

Not Found

The requested URL was not found on this server.
 
Reply
Old Jan 15, 2020 | 01:37 PM
  #4  
Minnie.the.Moocher's Avatar
Minnie.the.Moocher
OVERDRIVE
Joined: Jun 2014
Posts: 5,390
Likes: 576
From: earth PNW
It's a working link and I use that site all the time. Reboot, refresh, try a different browser, etc.
 
Reply
Old Jan 15, 2020 | 01:44 PM
  #5  
Red90's Avatar
Red90
1st Gear
Joined: Dec 2019
Posts: 25
Likes: 5
Yep. Must be on your end. I've used it from many different devices and location. It is the factory manual.
 
Reply
Old Jan 15, 2020 | 01:52 PM
  #6  
masterdrago's Avatar
masterdrago
Thread Starter
|
1st Gear
Joined: Jan 2020
Posts: 18
Likes: 1
From: SE Texas
Originally Posted by Minnie.the.Moocher
It's a working link and I use that site all the time. Reboot, refresh, try a different browser, etc.
And maybe a clean install of W7Pro64. If I do a straight left click, it takes me to https://www.northamericanmotoring.co...ed-manual.html which only shows a blank page. If I simply copy the link it takes me to the NOT FOUND page. Using Firefox 72.0.1. Copy and paste works in Chrome. Too bad some folks refuse to write for one of the most common browsers in use. Thanks for the pointers.

 
Reply
Old Jan 15, 2020 | 02:02 PM
  #7  
masterdrago's Avatar
masterdrago
Thread Starter
|
1st Gear
Joined: Jan 2020
Posts: 18
Likes: 1
From: SE Texas
Originally Posted by Red90
Thanks Red. That's a very comprehensive set of documents. I'll get a lot from them. Amazing how in all of my searching, I did not find that. Seems to be a good place here on NAM. Thanks again.
 
Reply
Old May 30, 2022 | 03:39 PM
  #8  
SunBird's Avatar
SunBird
3rd Gear
Joined: Sep 2019
Posts: 210
Likes: 9
From: ca

"Site Closed

This site is closed per demands of BMW AG.BMW recommends the official and up-to-date BMW TIS which can be accessed at www.bmwtis.com*.

* However, we believe that BMW violates the right to repair by effectively locking out individual consumers from basic repair information through unreasonably high access fees.

Contact us via the feedback form below if you have any questions or concerns."
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
45rake
1st Gen Countryman (R60) Talk (2010-2015)
19
Sep 29, 2025 05:01 AM
dw01
2nd Gen Countryman (F60) Talk (2016-2024)
4
Apr 8, 2019 11:39 AM
cstrumol
1st Gen Countryman (R60) Talk (2010-2015)
35
Jan 18, 2017 05:49 AM
mzacherle
R56 :: Hatch Talk (2007+)
8
Feb 26, 2016 07:29 AM
ZlotyR50
Stock Problems/Issues
9
Aug 28, 2010 01:36 PM




All times are GMT -7. The time now is 06:58 AM.