Mods for GP2
#1
Mods for GP2
Have a GP2 with 34K miles, live in PRC (People's Republic of California) and it's my DD. No plans to track or AX it. All stock with exception of Forge IC and WMW Resonator delete pipe. Really like how the mods work when it's spun up but looking for next steps that don't ruin DD abilities and keep it legal in CA (i.e. no CELs).
Have read all the threads on this site but would like to hear from other CA GP2 owners that have upgraded theirs and what worked best. Real world CA experience not stuff that I can't run here or make it a bear to drive. All mods need to be removable too.
FWIW, my shocks haven't taken a dump yet.
Have read all the threads on this site but would like to hear from other CA GP2 owners that have upgraded theirs and what worked best. Real world CA experience not stuff that I can't run here or make it a bear to drive. All mods need to be removable too.
FWIW, my shocks haven't taken a dump yet.
#2
Email me your number, I pretty much did everything to my GP2 including KW V3 Coilivers, bigger turbo, tune and big valves head MarioPalza@gmail.com mQubed Motorsport, Manic Tuning Dealer
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
#3
Vendor
iTrader: (10)
It will all depend on your goals for the car. You've already done the intercooler which is one of the best mods to do first.
My GP is fairly mild as I have race car for full out mods.
I would really recommend the powerflex torque arm bushing inserts as they help get whatever power you have to the ground.
Craven Short shifter, really gives life back to it.
Hsport rear sway bar
Some rear Hsport control arms and proper alignment.
Then there are engine mods like Forge recirc valve, ECU Tune and so on.
My GP is fairly mild as I have race car for full out mods.
I would really recommend the powerflex torque arm bushing inserts as they help get whatever power you have to the ground.
Craven Short shifter, really gives life back to it.
Hsport rear sway bar
Some rear Hsport control arms and proper alignment.
Then there are engine mods like Forge recirc valve, ECU Tune and so on.
#4
#5
mQubed Motorsport, Manic Tuning Dealer
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
#7
mQubed Motorsport, Manic Tuning Dealer
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
Trending Topics
#8
Vendor
iTrader: (10)
https://www.waymotorworks.com/perfor...-cooper-s.html
but you have to remember that you may not pass emissions with it, and if your car is under warranty there is a coding error stored in the ECU so the dealer will see it.
So we always recommend the Forge Intercooler as the first mod as you'll see the power gain with the lower temps, but no effect on emissions or warranty.
CAI intakes are waste if you want power as they just don't work to lower temps. But the intercooler does lower temps after the turbo.
A catless downpipe will always be louder than a catted downpipe. If you can find one of the old Akrapovic DP's that was the ideal one and what I have on my GP with no drone, but a good tone and power gains.
#9
Following this post since i want to get some upgrades on my GP as well right now it's all stock. Nothing crazy since my R53 track car is heavily modded. i had a JB+ for a month but Took off since i kept getting lean codes then had to get the fuel rail sensor replaced, and that was it dialed at 40%.
#10
I did a Manic tune. Forge intercooler. down pipe. Maybe about 30 hp increase.
+I like the power difference, but it's not a dramatic increase.
- I don't like the sound change from the downpipe when cruising on the interstate, it's louder overall and there's a drone quality to it. I've never been an
exhaust person (hey look at me)
Looking into upgrading the turbo to slightly larger one. I heard good things about
Owens turbos.
+I like the power difference, but it's not a dramatic increase.
- I don't like the sound change from the downpipe when cruising on the interstate, it's louder overall and there's a drone quality to it. I've never been an
exhaust person (hey look at me)
Looking into upgrading the turbo to slightly larger one. I heard good things about
Owens turbos.
#11
Send me an email mariopalza@gmail.com and I will send info, pictures and videos
mQubed Motorsport, Manic Tuning Dealer
mQubed Motorsport, Manic Tuning Dealer
Just wondering if there was any difficulty fitting the Alta Intake with the standard GP2 strut bar?
Thanks in advance
#13
Vendor
iTrader: (10)
https://www.waymotorworks.com/dry-pa...-cooper-s.html
On my personal GP2 I converted it back to the older N14 JCW airbox, but I had to cut it and use an older bottom half of N14 box
https://www.waymotorworks.com/jcw-in...6-r55-r57.html
#14
Following this post since i want to get some upgrades on my GP as well right now it's all stock. Nothing crazy since my R53 track car is heavily modded. i had a JB+ for a month but Took off since i kept getting lean codes then had to get the fuel rail sensor replaced, and that was it dialed at 40%.
Did you buy your JB+ new? I've heard that earlier JB+ units had issues with codes and that 100% on the new JB+ is really 50% on the earlier ones. Read here:
https://www.northamericanmotoring.co...he-jb-n18.html
#15
Since you in Cali, save yourself the headache on all this parts figuring and take a trip to go see Mario!
If you want to use WMW for all your parts, they def have everything you need. I got all my parts from them, but went with Mario for my RPM tune.
At a minimum, at least do all the mods required for Stage 2, and your GP will be bonkers!!!!
Intercooler
DownPipe
Colder NGK plugs
Hard Pipes (you have)
panel filter for intake (all you need)
If you want to use WMW for all your parts, they def have everything you need. I got all my parts from them, but went with Mario for my RPM tune.
At a minimum, at least do all the mods required for Stage 2, and your GP will be bonkers!!!!
Intercooler
DownPipe
Colder NGK plugs
Hard Pipes (you have)
panel filter for intake (all you need)