Anyone know of retailers participating in this sale?

Where's the cheapest set of Koni FSDs for an 04 MCS right now?

http://www.koni-na.com/pdf/ShockValueSalerules.pdf

 

Go to my site and there is a banner on the top for 25% off. Its good until june I think and the kickback I get goes directly to the free parts for diy article writers on the site.

 

$548 for Koni FSD. Not bad...

 

Not too bad at all. If only I was going that route I would have picked up some myself.

 

cool site thanks !

 

I would like to help, but Tire Rack does not list any Koni's for an R55, 56 or 57.

I am looking for some FSDs for my new 2010 JCW Clubman, does anybody know if Koni makes them for that application?

Bill

 

http://www.tirerack.com/suspension/S...ar=&brand=KONI

Here is the cooper s clubman. Sometimes you have to go back a year or two to get the results you need. As long as you stay in the same generation you are usually ok.

 

Thanks, I ordered a set starting from your banner so you get some credit.

I ordered my JCW Clubman with the standard suspension because I already had a set of the ABF / MegaMINI "127-SPEC" Springs and a 19mm Eibach rear sway bar.

After we put the springs and sway bar on the new stance was great, dropped the Clubman about 1.5 inches. But the stock dampers couldn't handle the rebound on a heavy bump, the car literally jumped off the pavement several times on the way to AMVIV, it was made worse by the fact the the car was fully loaded as my wife and I were vendors at AMVIV. So the decision was made to change the dampers as soon as possible before our trip from SoCal to the Dragon. The FSDs will be here by early next week so we have plenty of time to get them on. I was considering going with the JCW dampers, but there are no extras in the states and would have to be shipped from Germany, according to Morristown MINI.

Thanks for the help.

Bill

 

Sweet thanks. Just to let you guys know I dont take any of the money advertisement money personally. It goes directly back into the free parts givaways. How I have been doing it is using the ad money to purchase parts. Anyone can log in and post a diy article or copy an existing one that they have created on another site. The users are automatically entered into a from the hat style drawing and then sent out a free part. The only thing I really ask is that if your a member of this forum or any other forum that you create a link back to help draw new members to the forum you are a member of.

The coming up give away is: Craven Grill Badge Holder
http://www.minicooperspeed.com/free-mini-cooper-parts/



Thanks again for help supporting the diy archives.

 

Great price on the KONI's @ Tire Rack, but I found the same price @ shox.com with free shipping.