Searched every link I could find. Anyone have the Dinan stage 1 on an F56 and have dyno numbers for WHP and torque?

Curious where it falls in comparison to the JCW tune.

JCW tune produces approx 206WHP 236 W torque

 

I had mine done. 2018 MCS with the Dinan Elite tune and exhaust. 241HP and 287 lbs. I'm on vacation but when I get home I will take a picture of the print out they gave me. It was only 2% variable of what Dinan states and since my car has less than 1k miles it will only get better over time. It is really an amazing tune.

 

Thanks so much for posting. Those numbers are outstanding. Your numbers look much better than a JCW dyno @ 230WHP and 219 Wtq

Torque is where the fun is. When I compare car numbers, I like to see the torque numbers higher than the HP. In cases where I test drove cars w/ the numbers inverted, I found their acceleration and responsiveness to be less than stellar.

My 2015 w/ the JCW tune performs so much better than stock, I can only imagine how yours must feel.

http://www.motoringfun.com/2015/11/1...-power-module/

 

We've sold many of them and will be installing them at MOTD so hopefully some at the event will dyno it there. Will report back if they do.
https://www.waymotorworks.com/dinan-...ng-module.html

 

I'd swear I have the B46 motor in my Mini (2015 S) and not the B48. Unsure whether the programming of that module will work properly in a 2015 or newer S.

 

You do have the B46. The difference between the pre 12/2014 and post 12/2014 production is one of the plugs. If you download the installation instructions it'll show the difference.

 

Yes the programming will work fine, it is more dependent on the production for the wiring harness.

 

Thanks for the response. Sometimes difficult to glean correct information when scanning various websites.