Hey folks,

I am looking at wheel options (either CCW, Rotiform or Work) for my F54 JCW and was wondering about wheel fitment. The silver grip spoke wheels that came with the car are 8x18, ET 57mm. I am concerned of course by the big brake kit, but also how much offset I can get away with...I do plan on lowering the care on KW coilovers in the spring. I figured ET 45mm would be safe but I am only guessing at this early stage. Any input would be appreciated

 

I had 3sdm 0.06 alloys on my f54 Cooper SD, fronts were 18x8.5j et 40 and rears 18x9.5j et40. Fit just fine, but then i dont have the jcw brakes.

 

Got any pictures of that fitment? Stock ride?

All I can find are pics of your R55

 

Here ypu go. Ive since sold those alloys as the rear was to wide for my liking. Its also on H&R springs 30mm dropped.

 

Im currently on KW V1 COILOVERS and on stock wheels, however just bought a set of Rotiform BLQ DDT 18x8.5 which will go on tomorrow.

 

Great pics, can't wait to see the new wheels. I was wondering how a wider wheels would fit...8.5 would be the widest I'd consider.

 

Looks awesome! Are those 17's or 18's on it right now? I have a nice set of 17's but I'm worried they would look too small on a Clubman.

Edit: looks like they're 18's.

 

Those silver wheels in the bottom pics are 18 inch Grip Spokes

 

Don't leave us hanging!

I'm thinking about a set of 18x8.5 square Formula GT's

 

So sorry guys, should have replied sooner.

Yes the stock wheels are 18”

Anyway, this is how manclub looks now.

 

Well that's practically perfect, nice! The Formula GT's are the exact same specs so that's a relief.

Edit: If you get a chance, could you take a pic from the front and rear to show clearances?

From the looks of it, if 18x8.5 et 45 fits that well in the front, an 18x8 et 35 should be an easy fit too as that would only poke 3.7mm further. If so that opens up a lot of options, like the RPF1in both 18 and 19".

 

 

I have ordered this week. Japan wheels JR-3 in 19x8,5 ET40. I want have 19” because I will not lower my car (i drive a lot, 13000km in two months) so I am interested on how it will look.

 

Your car looks Absolutely amazing by the way

 

We have more options here:

https://www.northamericanmotoring.co...l-options.html

We fitted 10" wide on stretched tires on the F54 ALL4 but it had crazy poke. Those ones above look so much better lowered, on the ALL4 we had it was really lifted.

 

I search a long time for wheels which fit my 2017 Clubman JCW. With the big Brembo breaks it's very difficult to find wheels which fit.

With the small breaks from the Cooper S it's no problem, but with the JCW breakes it's a challenge.
Also just a whees is 19x8.5 ET40 or 45 it's not sure it fit without a problem.


Her my list of all wheels which fit the Clubman JCW:


NM Engineering
RSe11, 18x7.5 ET45

Work Wheels
Meister S1R, 19x8.5 ET43 (A-Disc)

MB Design
LV1, 19x8.5 ET45

Enkei
Yamato, 18x8 ET45
Wakasa, 18x8 ET45

MAK Wheels
Zenith, 17x8 ET42
Zenith, 18x8 ET42

OXXO
Vapor, 20x8.5 ET45

Sparco
Pro Corsa, 17x7.5 ET35
Trofeo 5, 17x7.5 ET35

OZ Wheels
Hyper GT HLT, 17x7.5 ET35
Hyper GT HLT, 18x7.5 ET35
Hyper GT HLT, 18x8 ET35
Hyper GT HLT, 19x8 ET35
Ultraleggera, 18x8 ET45
Ultraleggera HLT, 19x8 ET41
Superturismo LM, 17x7.5 ET35
Superturismo LM, 18x8 ET45
Superturismo LM, 19x8.5 ET44
Rally Racing, 17x8 ET35 or ET45
Rally Racing, 18x7.5 ET35
Rally Racing, 18x8 ET35 or ET45
Anyversari 45, 18x7.5 ET35 or ET50

Dezent
RE dark, 19x8 ET45

MSW
MSW 71, 17x7.5 ET35
MSW 71, 18x8 ET35
MSW 71, 19x8 ET35
MSW 71, 19x8.5 ET44
MSW 72, 18x8 ET35


I hope this helps. I will add more wheels to the list if I know they will fit.

 

Thanks for that list!

 

No Problem.


Here a pic of the Enkei Yamato, 18x8 ET45 on my Clubman JCW. Car is lowered with BC Racing coilovers.

 

Does anyone know size 18inch Volks would clear the jcw brakes? C28n's would look good

 

[QUOTE=BazV;4336473]Im currently on KW V1 COILOVERS and on stock wheels, however just bought a set of Rotiform BLQ DDT 18x8.5 which will go on tomorrow.

 

I was told that the HRE FF04 19" et 47 would work on my Clubman s All4 , I'm deciding whether to go satin black or liquid silver . Feedback would be much appreciated, the car color is chili red JCW package , I was thinking the black satin would blend well with the black on the car? I'm quoted $526/wheel plus shipping.

 

Yep,

The FF01 and the FF15 will work also, you need the et47s.

https://www.ecstuning.com/Mini-2017-...arket_Alloys/3

I would go with black since you have a red car and black roof. I think the silver works on the MINI Gray color cars better, in my opinion.

 

Even though I don't care for black rims, I think that would be the better color selection for your Chili Red version. The silver rims almost look out of place on your color combo, as compared to my combo (see sig below). HRE's are some nice rims, let's see them once you get them installed!

 

Can you post pictures of wheels on car? I'm on the fence on what wheels to get.



QUOTEQUOTETE=OJ MINI;4345941]I have ordered this week. Japan wheels JR-3 in 19x8,5 ET40. I want have 19” because I will not lower my car (i drive a lot, 13000km in two months) so I am interested on how it will look.[/QUOTE]

 

Thank you for that list I'm currently looking at wheels for our JCW I really wanted BBC CH-R's but they won't fit