I'm not sure what's involved, but how hard is JCW Injector Install? I'm not an avid mechanic, actually hardly one at all. Since picking up my mini, I've been dabling abit. Most of my mods so far have been professionally installed, but I did install my M7 AGS system. Seeing the outmotoring sale price on the injectors has sparked my interest in getting them. Do you guys think that I should do it myself or leave it up to the professionals?

 

Its easy it will take you about an hour and 30 mins. And if you can install the AGS this will be a walk in the park.

 

Great post with pics on how to do this in this thread... post #6 by Dr Obnxs
https://www.northamericanmotoring.co...ad.php?t=68954

 

TOOLS: T-30 torx bit(preferably in a socket form), 8mm socket, 13mm socket

also when you put the injectors back inot the intake spray some wd-40 or similar on the o rings so thay slide right in easily and don't tear

 

Very simple to do - read this post. If you can do a AGS you can do this .

 

can anyone tell me if these will make my obc less accurate, mpg etc