Drivetrain Psi Fi/Helix TurboKompressor video!
When is it coming to market?
What is the estimated price?
What components are included?
What is the estimated hp with no other mods?
I have played around and srtforums.com and you guys seem pretty popular over there. I am definetely interested in this kit so long as it comes out before the twinscrew supercharger joint venture from Webb/M7. Is it you that I read where it says your temps were lower than a stock MCS?
I would shell out a good wad of dough for one of these in the next 3-5 months.
What is the estimated price?
What components are included?
What is the estimated hp with no other mods?
I have played around and srtforums.com and you guys seem pretty popular over there. I am definetely interested in this kit so long as it comes out before the twinscrew supercharger joint venture from Webb/M7. Is it you that I read where it says your temps were lower than a stock MCS?
I would shell out a good wad of dough for one of these in the next 3-5 months.
When is it coming to market?
we are a go for sales
What is the estimated price?
Helix is estimating cost at $4800
What components are included?
Parts List!
Garrett GT28rs disco potato turbo
360hp potential
-cast exhaust manifold w / 5 year warranty
-Helix increased diameter pulley to lower S/C boost and parasitic drag and increase turbo charger boost.
-stainless steel 2.5 inch downpipe with integral 300 cell metal matrix cat.** this DP can be flanged at a full 2.5 inch or tapered to 2.25 to match the factory exhaust.
-custom silicone charge pipe
-Turbosmart eboost boost contoller/boost gauge and pod
-Turbosmart BOV
-Psi-Fi Powerpaq engine management (fuel/timing/aquamist controller) w/ street and race maps
-500 cc direct drop in injectors
-Porsche quality fastening hardware
-modified supercharger inlet tube
-all lines and fittings
-Aquamist water/alcohol injection ***Optional(lowers charge air temps approx 30 degrees F and allows 2 more psi boost on pump gas)***
-high flow exhaust system ***optional in testing, will have before and after dyno data vs stock exhaust***
-Depends diaper for the initial test drive
What is the estimated hp with no other mods?
On Helix' stingy mustang dyno we made a little over 250whp(approx 100whp improvement over stock) with no aquamist, stock one ball exhaust at 20 psi. Since then we have added some more boost, a freer flowing exhaust and the aquamist is on and working awesome. We hope to get back to the dyno this week for a power update but the car is making alot more power across the board(seat of the pants) than it was when we dyno'd previously.[/QUOTE]
we are a go for sales
What is the estimated price?
Helix is estimating cost at $4800
What components are included?
Parts List!
Garrett GT28rs disco potato turbo
-cast exhaust manifold w / 5 year warranty
-Helix increased diameter pulley to lower S/C boost and parasitic drag and increase turbo charger boost.
-stainless steel 2.5 inch downpipe with integral 300 cell metal matrix cat.** this DP can be flanged at a full 2.5 inch or tapered to 2.25 to match the factory exhaust.
-custom silicone charge pipe
-Turbosmart eboost boost contoller/boost gauge and pod
-Turbosmart BOV
-Psi-Fi Powerpaq engine management (fuel/timing/aquamist controller) w/ street and race maps
-500 cc direct drop in injectors
-Porsche quality fastening hardware
-modified supercharger inlet tube
-all lines and fittings
-Aquamist water/alcohol injection ***Optional(lowers charge air temps approx 30 degrees F and allows 2 more psi boost on pump gas)***
-high flow exhaust system ***optional in testing, will have before and after dyno data vs stock exhaust***
-Depends diaper for the initial test drive

What is the estimated hp with no other mods?
On Helix' stingy mustang dyno we made a little over 250whp(approx 100whp improvement over stock) with no aquamist, stock one ball exhaust at 20 psi. Since then we have added some more boost, a freer flowing exhaust and the aquamist is on and working awesome. We hope to get back to the dyno this week for a power update but the car is making alot more power across the board(seat of the pants) than it was when we dyno'd previously.[/QUOTE]
Originally Posted by Psi-Fi
The SPI kids should come with a similar one.
This sounds like quite a sweet system. I currently have a Magnaflow exhaust and have a milltek header on the way. By next month I will also have the M7 AGS and their big bore tb.... my concern is, how compatible is this system with other aftermarket mods. I assume that all of the tubing has to take up quite a bit of room.
I noticed that you have a boost gauge/controller. Is it possible to replace the gauge with one from say autometer? I planned on getting 4 of their new Nexus gauges next month and I would like all of my gauges to be the same.
What is the cost of the optional aquamist system?
If I am gonna spend $5k I want to know all of the little details
I noticed that you have a boost gauge/controller. Is it possible to replace the gauge with one from say autometer? I planned on getting 4 of their new Nexus gauges next month and I would like all of my gauges to be the same.
What is the cost of the optional aquamist system?
If I am gonna spend $5k I want to know all of the little details
I'm confused by the thread title. It says "Psi Fi/Helix TurboKompressor video!", however the first post is from a competitor SPI with a vid of their system during a track day.
What happened? It seems someone spilled their chocolate into my peanut-butter.
What happened? It seems someone spilled their chocolate into my peanut-butter.
Originally Posted by JCampos
Hrm, I think Ill wait for the twinscrew supercharger kit from webb/m7.
https://www.northamericanmotoring.co...ad.php?t=15784
Awesome track video. I want more please

Originally Posted by TWINCHRGDMINI
...short clip of the SPI Twincharged MCS running with a Supra and Viper from 70mph to 110mph, short shifting at 6K. The footage was from one of our test days, checking some improvements to the kit. Those cars better watch their mirrors because we will be coming back with even more POWER!
http://spipowerexcel.com/newimages/track01.wmv
http://spipowerexcel.com/newimages/track01.wmv
Thread
Thread Starter
Forum
Replies
Last Post
MINI Stupor
R50/R53 :: Hatch Talk (2002-2006)
3
Oct 1, 2015 11:36 AM
EVMini
R56 :: Hatch Talk (2007+)
4
Sep 28, 2015 10:20 AM



