Drivetrain WMW Exhaust Fitment Issue?
#4
#6
Loosen all exhaust fasteners, install your new hangers.
Have someone hold the tips in the center of the bumper slot, then start tightening from the front to the rear.
If that doesn't work, loosen all fasteners again, (even the two pipe attachment fasteners). Have that person bias the tips to the opposite side of the slot in the bumper cover that they "want" to go and hold them in place as you start tightening all of the fasteners.
Mike
Have someone hold the tips in the center of the bumper slot, then start tightening from the front to the rear.
If that doesn't work, loosen all fasteners again, (even the two pipe attachment fasteners). Have that person bias the tips to the opposite side of the slot in the bumper cover that they "want" to go and hold them in place as you start tightening all of the fasteners.
Mike
Thread
Thread Starter
Forum
Replies
Last Post
exocet
R50/R53 :: Hatch Talk (2002-2006)
7
03-29-2015 04:55 PM
Kenningtons
R60 :: Countryman Talk (2010-2015)
5
03-12-2012 09:06 PM
markbradford
Drivetrain (Cooper S)
18
09-14-2005 02:22 PM