Drivetrain Another One-Ball Done
2nd Gear
Joined: Feb 2012
Posts: 71
Likes: 0
From: Ford City, PA. 16226
You can do it yourself for about $15-$20 bucks for the 90 degree 2.5" elbow with flared ends.
Maybe 2 - 2.5" pipe clamps might cost about $3-$6 bucks each??! This way you will avoid having to weld.
Just mark the elbow, then cut out the passanger side exhaust....then install elbow and pipe clamps.
Should only cost around $25 bucks!
I also got my $14 dollar 2.5" cone filter in and with the one ball mod he car is more responsive and the charger whines more!!
I can send pics of both if anybody is interested.
Maybe 2 - 2.5" pipe clamps might cost about $3-$6 bucks each??! This way you will avoid having to weld.
Just mark the elbow, then cut out the passanger side exhaust....then install elbow and pipe clamps.
Should only cost around $25 bucks!
I also got my $14 dollar 2.5" cone filter in and with the one ball mod he car is more responsive and the charger whines more!!
I can send pics of both if anybody is interested.
Thread Starter
|
2nd Gear
Joined: Jan 2012
Posts: 72
Likes: 0
From: Portland, Oregon
WOW 150-200!!! Have they looked under the car, you dont need to drop the exhaust or anything. The shop that did mine put it on the lift, hopped under with a sawzall, hacked the resonator out, did a quick bend with flared ends and some welding. That price just seems wrong! I was in and out in 30-40 min, unless they have a 400/hr labor rate thats just not right....thievery!!!!!!!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
R50/53 Guidance on selling a 2005 S
Toolman
R50/R53 :: Hatch Talk (2002-2006)
8
Jan 20, 2016 06:50 AM
Drivetrain One-ball Mod : Where to get it done?
minimizd06
Drivetrain (Cooper S)
14
Aug 10, 2007 10:33 AM
RedSkunk
All other MINI parts and items for Sale (archive)
4
Jun 16, 2007 08:02 AM
Drivetrain How to make one-ball to sound a bit meaner?
sprp85
Drivetrain (Cooper S)
9
May 10, 2007 10:36 AM