Drivetrain (Cooper S) MINI Cooper S (R53) intakes, exhausts, pulleys, headers, throttle bodies, and any other modifications to the Cooper S drivetrain.

Drivetrain Driving Jan's GP with the 2.0L stroker motor - impressions

Thread Tools
 
Search this Thread
 
Old May 24, 2008 | 05:55 AM
  #1  
CFMINI's Avatar
CFMINI
Thread Starter
|
4th Gear
iTrader: (1)
Joined: May 2004
Posts: 477
Likes: 1
From: Corona, CA
Driving Jan's GP with the 2.0L stroker motor - impressions

I was at Danny's (Mini Corsa) yesterday having 440cc injectors and RMW's new cam put in my "new" MCS (the ex SpiderX car), and he also had to put in a new O2 sensor because of a CEL.

Jan came by with his GP late in the day and he was trying to trace down a leak in the new water-to-air Laminova system, which is an amazing looking system by the way. He threw me the keys to the GP and said "Take it for a spin, don't go over 6000 RPM." OK, you don't have to ask me twice!!


Well, he did not warn me about that clutch!! He has the Stage 4 Clutchmasters 4 puck model and it is basically an on-off switch!! Once I got out of the parking lot without stalling it, I took it for a "long" trip around the block - well OK several blocks - around Danny's shop in Van Nuys.


OMFG!! This motor (and the rest of the car too) is fricking amazing!! The torque is instantaneous, unlike any other car I have ever driven. And it just keeps pulling like a mother up to 6K and ahem a bit more!! What a ride!!

When I got back from my ride, Jan said that the tune is still not done on this car either. Numbers?? You won't care too much about numbers when you drive this one!! Jan is going to put some race rubber on it and get it out to Big Willow and SOWS soon and also get some drag slicks working with it and get it to the strip. Stay tuned!!
 
Reply
Old May 24, 2008 | 06:56 AM
  #2  
newbs49's Avatar
newbs49
Banned
iTrader: (1)
Joined: Aug 2002
Posts: 2,469
Likes: 0
From: North Tonawanda NY
Your one lucky guy. What's up with the w2a leak Jan?
 
Reply
Old May 24, 2008 | 09:38 AM
  #3  
Guest's Avatar
Guest
6th Gear
Joined: Aug 2005
Posts: 3,902
Likes: 2
From: SoCaL (Agoura Hills)
Originally Posted by CFMINI
I was at Danny's (Mini Corsa) yesterday having 440cc injectors and RMW's new cam put in my "new" MCS (the ex SpiderX car), and he also had to put in a new O2 sensor because of a CEL.

Jan came by with his GP late in the day and he was trying to trace down a leak in the new water-to-air Laminova system, which is an amazing looking system by the way. He threw me the keys to the GP and said "Take it for a spin, don't go over 6000 RPM." OK, you don't have to ask me twice!!


Well, he did not warn me about that clutch!! He has the Stage 4 Clutchmasters 4 puck model and it is basically an on-off switch!! Once I got out of the parking lot without stalling it, I took it for a "long" trip around the block - well OK several blocks - around Danny's shop in Van Nuys.


OMFG!! This motor (and the rest of the car too) is fricking amazing!! The torque is instantaneous, unlike any other car I have ever driven. And it just keeps pulling like a mother up to 6K and ahem a bit more!! What a ride!!

When I got back from my ride, Jan said that the tune is still not done on this car either. Numbers?? You won't care too much about numbers when you drive this one!! Jan is going to put some race rubber on it and get it out to Big Willow and SOWS soon and also get some drag slicks working with it and get it to the strip. Stay tuned!!
With the stock GP IC he was putting down 262 whp and 232 lb-ft of torque . Laminova should be even higher. It runs so little boost that the IAT's barely go up, even on a stock IC.

Glad you enjoyed it!
 

Last edited by Guest; May 24, 2008 at 10:20 AM.
Reply
Old May 24, 2008 | 09:53 AM
  #4  
Revolution Mini Works's Avatar
Revolution Mini Works
Banned
iTrader: (1)
Joined: Jun 2007
Posts: 4,878
Likes: 2
From: Irvine, CA
Originally Posted by newbs49
Your one lucky guy. What's up with the w2a leak Jan?

actually I was at Danny's for a torn boot on my steering rack

I do however have a leak on my supercharger pipe from the Throttle body that I need fixed

Can't wait to get it re-tuned with the Laminova on it
 
Reply
Old May 24, 2008 | 09:58 AM
  #5  
Myke@RPI's Avatar
Myke@RPI
4th Gear
iTrader: (1)
Joined: Jan 2008
Posts: 404
Likes: 0
From: The Park, SoCAL
DAMN! I need to hurry up and graduate so i can get enough for the stroker kit!
 
Reply
Old May 24, 2008 | 10:00 AM
  #6  
ingsoc's Avatar
ingsoc
6th Gear
Joined: Jan 2005
Posts: 1,719
Likes: 1
From: New Brunswick, NJ
Originally Posted by rustyboy155
It runs so little boost that the IAT's barely go up, even on a stock IC.
Correct me if I'm wrong, Jan, but with a 19% pulley on the M45 it only makes 10.5 *PSI, right? Now, I wonder what would happen if you used a new blower...

*Was a long night... heh
 

Last edited by ingsoc; May 24, 2008 at 10:42 AM.
Reply
Old May 24, 2008 | 10:01 AM
  #7  
newbs49's Avatar
newbs49
Banned
iTrader: (1)
Joined: Aug 2002
Posts: 2,469
Likes: 0
From: North Tonawanda NY
Just think if it runs too coooool. I see PISTONS with a little higher number on them. Oh! I forgot you still have the 45 on it.
Did you get my email.
 
Reply
Old May 24, 2008 | 10:04 AM
  #8  
Revolution Mini Works's Avatar
Revolution Mini Works
Banned
iTrader: (1)
Joined: Jun 2007
Posts: 4,878
Likes: 2
From: Irvine, CA
Originally Posted by ingsoc
Correct me if I'm wrong, Jan, but with a 19% pulley on the M45 it only makes 10.5 lb ft, right? Now, I wonder what would happen if you used a new blower...

haven't checked the boost, it was 10.5 with 15%
 
Reply
Old May 24, 2008 | 10:05 AM
  #9  
Revolution Mini Works's Avatar
Revolution Mini Works
Banned
iTrader: (1)
Joined: Jun 2007
Posts: 4,878
Likes: 2
From: Irvine, CA
Originally Posted by newbs49
Just think if it runs too coooool. I see PISTONS with a little higher number on them. Oh! I forgot you still have the 45 on it.
Did you get my email.

yes, will see you on Saturday the 7th
 
Reply
Old May 24, 2008 | 11:34 AM
  #10  
Revolution Mini Works's Avatar
Revolution Mini Works
Banned
iTrader: (1)
Joined: Jun 2007
Posts: 4,878
Likes: 2
From: Irvine, CA
It's a lot cleaner now
Even the engine bay is cleeeeeeeeeeeeeeeeeeeeeean

2 incredible liters of goodness
I really love this car




 
Attached Thumbnails Driving Jan's GP with the 2.0L stroker motor - impressions-2lfrontal.jpg  

Last edited by Revolution Mini Works; Apr 21, 2009 at 08:49 PM.
Reply
Old May 24, 2008 | 11:37 AM
  #11  
Haggardsk8er's Avatar
Haggardsk8er
5th Gear
15 Year Member
Liked
Joined: Jan 2007
Posts: 769
Likes: 4
From: Michigan
Lets see the full 2l!!!!
 
Reply
Old May 24, 2008 | 11:42 AM
  #12  
Revolution Mini Works's Avatar
Revolution Mini Works
Banned
iTrader: (1)
Joined: Jun 2007
Posts: 4,878
Likes: 2
From: Irvine, CA
Originally Posted by Haggardsk8er
Lets see the full 2l!!!!

when I had the stock intercooler on it you couldn't tell it was anything but stock.....
 
Reply
Old May 24, 2008 | 11:44 AM
  #13  
Haggardsk8er's Avatar
Haggardsk8er
5th Gear
15 Year Member
Liked
Joined: Jan 2007
Posts: 769
Likes: 4
From: Michigan
Nice!!!
Car looks clean!!
I'll make to get a ride when I come down for my tune eventually...
 
Reply
Old May 24, 2008 | 11:45 AM
  #14  
Jaw_F430's Avatar
Jaw_F430
2nd Gear
Joined: Mar 2008
Posts: 108
Likes: 0
You fitted the W2A to it now? Does it have CROSS suspension fitted?
 
Reply
Old May 24, 2008 | 11:46 AM
  #15  
Guest's Avatar
Guest
6th Gear
Joined: Aug 2005
Posts: 3,902
Likes: 2
From: SoCaL (Agoura Hills)
Originally Posted by Jaw_F430
You fitted the W2A to it now? Does it have CROSS suspension fitted?
 
Reply
Old May 24, 2008 | 11:47 AM
  #16  
Jaw_F430's Avatar
Jaw_F430
2nd Gear
Joined: Mar 2008
Posts: 108
Likes: 0
I can see it now from looking at the picture again
 
Reply
Old May 24, 2008 | 11:49 AM
  #17  
Longboard Mini's Avatar
Longboard Mini
6th Gear
iTrader: (1)
Joined: Feb 2006
Posts: 2,438
Likes: 1
From: Rancho Santa Margarita
It's about time you cleaned it.

Longboard


Originally Posted by Revolution Mini Works
It's a lot cleaner now
Even the engine bay is cleeeeeeeeeeeeeeeeeeeeeean

2 incredible liters of goodness
I really love this car




 
Reply
Old May 24, 2008 | 11:50 AM
  #18  
Haggardsk8er's Avatar
Haggardsk8er
5th Gear
15 Year Member
Liked
Joined: Jan 2007
Posts: 769
Likes: 4
From: Michigan
Originally Posted by Jaw_F430
I can see it now from looking at the picture again

Oh snap... I didnt even think to notice the bigass heat exchanger!!!
 
Reply
Old May 24, 2008 | 11:52 AM
  #19  
Revolution Mini Works's Avatar
Revolution Mini Works
Banned
iTrader: (1)
Joined: Jun 2007
Posts: 4,878
Likes: 2
From: Irvine, CA
Originally Posted by Jaw_F430
You fitted the W2A to it now? Does it have CROSS suspension fitted?

yes and yes





 
Reply
Old May 24, 2008 | 11:55 AM
  #20  
Haggardsk8er's Avatar
Haggardsk8er
5th Gear
15 Year Member
Liked
Joined: Jan 2007
Posts: 769
Likes: 4
From: Michigan
Holy crap!!!
I'm gonna need one of those for out here in HelL!!!!...aka Phoenix
 
Reply
Old May 24, 2008 | 11:56 AM
  #21  
Haggardsk8er's Avatar
Haggardsk8er
5th Gear
15 Year Member
Liked
Joined: Jan 2007
Posts: 769
Likes: 4
From: Michigan
You don't loose any pressure using the stock IC boot thingys??
 
Reply
Old May 24, 2008 | 12:04 PM
  #22  
Revolution Mini Works's Avatar
Revolution Mini Works
Banned
iTrader: (1)
Joined: Jun 2007
Posts: 4,878
Likes: 2
From: Irvine, CA
Originally Posted by Haggardsk8er
You don't loose any pressure using the stock IC boot thingys??

nope
 
Reply
Old May 24, 2008 | 12:12 PM
  #23  
Haggardsk8er's Avatar
Haggardsk8er
5th Gear
15 Year Member
Liked
Joined: Jan 2007
Posts: 769
Likes: 4
From: Michigan
Where did you put the BOV??
 
Reply
Old May 24, 2008 | 01:58 PM
  #24  
Revolution Mini Works's Avatar
Revolution Mini Works
Banned
iTrader: (1)
Joined: Jun 2007
Posts: 4,878
Likes: 2
From: Irvine, CA
Originally Posted by Haggardsk8er
Where did you put the BOV??
we make them go fast without BOVs
 
Reply
Old May 24, 2008 | 07:29 PM
  #25  
jaynicholson's Avatar
jaynicholson
5th Gear
20 Year Member
iTrader: (2)
Joined: Sep 2005
Posts: 868
Likes: 0
From: Rochester, NY
Jan, have you done a flapectomy on your JCW intake?
 
Reply



All times are GMT -7. The time now is 08:31 PM.