Drivetrain (Cooper S) MINI Cooper S (R56) intakes, exhausts, pulleys, headers, throttle bodies, and any other modifications to the Cooper S drivetrain.

Drivetrain EBC Redstuff pads for R56

Thread Tools
 
Search this Thread
 
Old Aug 19, 2008 | 09:04 AM
  #26  
Ben-Ja-Min's Avatar
Ben-Ja-Min
2nd Gear
Joined: Jul 2007
Posts: 109
Likes: 0
From: Essex, England
Originally Posted by MINIutia
I've installed EBC Redstuff pads on my '08 MCS (non-JCW), these are the correct part numbers for direct replacement:
F: DP91789C
R: DP31931C

Don't have enough miles on them to render an opinion on performance.
Are your sure its DP91789C or should be DP31789C? I'm ordering some at the moment and the first code is not recognized but the second one is.
 
Reply
Old Aug 19, 2008 | 10:11 AM
  #27  
MINIutia's Avatar
MINIutia
3rd Gear
iTrader: (1)
Joined: Jun 2008
Posts: 159
Likes: 0
From: So Cal
100% certain. Had trouble locating a vendor with stock and a good part No. Got mine at MossMini Part is here
 
Reply
Old Aug 19, 2008 | 10:14 AM
  #28  
MINIutia's Avatar
MINIutia
3rd Gear
iTrader: (1)
Joined: Jun 2008
Posts: 159
Likes: 0
From: So Cal
Tell you what, give me an hour and I;ll pull the box and verify..
Originally Posted by MINIutia
100% certain. Had trouble locating a vendor with stock and a good part No. Got mine at MossMini Part is here
 
Reply
Old Aug 19, 2008 | 10:55 AM
  #29  
MINIutia's Avatar
MINIutia
3rd Gear
iTrader: (1)
Joined: Jun 2008
Posts: 159
Likes: 0
From: So Cal
My bad!!!
Sorry, the correct numbers are:
Front - DP31789C
Rear - DP31931C

I've included an image of the boxes


Originally Posted by MINIutia
Tell you what, give me an hour and I;ll pull the box and verify..
 
Attached Thumbnails EBC Redstuff pads for R56-pads.jpg  
Reply
Old Aug 19, 2008 | 12:52 PM
  #30  
Ben-Ja-Min's Avatar
Ben-Ja-Min
2nd Gear
Joined: Jul 2007
Posts: 109
Likes: 0
From: Essex, England
Thats great! Just what the R56 S needs!
 
Reply
Old Aug 20, 2008 | 12:50 AM
  #31  
Ben-Ja-Min's Avatar
Ben-Ja-Min
2nd Gear
Joined: Jul 2007
Posts: 109
Likes: 0
From: Essex, England
Got this info from EBC about the pads. They them selves seem a bit confussed! They didn't know the new Cooper S was even a turbo!
 
Attached Thumbnails EBC Redstuff pads for R56-dp31789c.jpg   EBC Redstuff pads for R56-dp31931c.jpg  
Reply
Old Oct 3, 2011 | 05:27 PM
  #32  
john171's Avatar
john171
3rd Gear
Joined: Apr 2009
Posts: 191
Likes: 0
From: YORK, PA
Red Stuff rear pads

Originally Posted by MINIutia
I've installed EBC Redstuff pads on my '08 MCS (non-JCW), these are the correct part numbers for direct replacement:
F: DP91789C
R: DP31931C

Don't have enough miles on them to render an opinion on performance.
Those numbers are exactly what I got off the EBC site. I had also purchased a set of the DP31701C for my rear pad replacement from a site that brought them up when I entered my car info:
2007 MINI Cooper S Hatchback
Am now working with them to get the correct set.
 
Reply
Old Feb 17, 2012 | 02:46 PM
  #33  
NintenTom's Avatar
NintenTom
4th Gear
iTrader: (4)
Joined: Dec 2010
Posts: 376
Likes: 1
Sorry to bring up an old thread, but are the part numbers the same for a 2011 R56?
 
Reply
Old Feb 18, 2012 | 05:07 AM
  #34  
claud's Avatar
claud
3rd Gear
Joined: Jan 2011
Posts: 191
Likes: 0
From: Raleigh, NC
I have about 10000 miles on my Red Stuff pads. I just ordered mine from Way and he sent me the correct ones. I also installed WMW SS brake lines all round. A few weekends ago, I had a great time testing my brakes out on a club run in the NC mountains. Just think four Tail of the Dragon runs in one day with no cops or motorcycles, so you are able to go at a brisk pace. I'm very happy with their fade resistance, modulation and very low dust level.
 
Reply
Old Feb 18, 2012 | 06:12 AM
  #35  
drsimmons's Avatar
drsimmons
6th Gear
Joined: Sep 2011
Posts: 1,961
Likes: 0
From: Robertsdale, Alabama
For the EBC redstuff pads. Also for WayMotorWorks always sending me the correct pads.
Hope I get lots of miles from them.
No fade and smooth.
Low dust but the dust seems to clean off easily.
 
Reply
Old Feb 18, 2012 | 09:08 AM
  #36  
john171's Avatar
john171
3rd Gear
Joined: Apr 2009
Posts: 191
Likes: 0
From: YORK, PA
Even though I posted above that the numbers were correct for my '07 MCS HB, when they were installed, neither set would accept the pad wear sensor cable end. At that point I was so frustrated, the original vendor had sent the completely wrong pads, and gave me a lot of grief about it being past the return period. And even though I argued that it was their fault, since their site showed the incorrect pads for my car, they would only refund my $$ if I ordered the corrected ones from them, then ship the others back at my cost.
Needless to say I did not do that, I sold those online with very clear description of the cars they fit, and a link the original EBC numbers, which I obtained from the EBC site.
Glad to hear you are having great use out of yours,
and maybe this spring I will order replacement red stuff pads from WMW.
And as far as the way the brakes work, they are dandy!!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
W0TM8
General MINI Talk
23
Dec 19, 2019 07:50 AM
squawSkiBum
MINI Parts for Sale
15
Oct 2, 2015 09:21 AM
thebordella
R56 :: Hatch Talk (2007+)
22
Aug 31, 2015 01:37 PM
Mini Mania
Drivetrain Products
0
Aug 25, 2015 09:18 AM




All times are GMT -7. The time now is 07:08 AM.