Drivetrain Just another Dyno thread.

Reply Subscribe

Thread Tools

Search this Thread

Sep 18, 2007 | 09:24 PM

groovetini

Thread Starter

2nd Gear

Joined: Mar 2007

Posts: 89

Likes: 1

Just another Dyno thread.

Here she is:

6spd, mods are in the sig, nothing special. Note: I don't have the dinan software installed yet.

So are these numbes low, high, average?

Sep 18, 2007 | 09:44 PM

SayGoodbye

6th Gear

Joined: Feb 2006

Posts: 1,299

Likes: 0

Last edited by SayGoodbye; Oct 3, 2007 at 08:11 PM.

Sep 19, 2007 | 08:27 AM

Thumper460

4th Gear

Joined: Aug 2002

Posts: 510

Likes: 0

From: Orange Park, Fl.

Looks good!! I managed a 181 Actual WHP on my 06 !! 15%/ CAI and one -ball!! I used a W/M progressive spray to get those numbers in 95+ Fl. weather and no I/C cooling fan.. ( trying to duplicate hot Street Drving)!!

With what you have... your in there!!

Just me...............................

Thumper

Sep 19, 2007 | 08:33 AM

groovetini

Thread Starter

2nd Gear

Joined: Mar 2007

Posts: 89

Likes: 1

oh yeah, those numbers were with a fan directly on the stock IC blowing about 80mph. Without the fan, the numbers were about 10hp lower.

Also, what approximately is the drivetrain loss on a MINI?

Sep 19, 2007 | 08:36 AM

SayGoodbye

6th Gear

Joined: Feb 2006

Posts: 1,299

Likes: 0

Last edited by SayGoodbye; Oct 3, 2007 at 08:12 PM.

Sep 19, 2007 | 08:51 AM

Thumper460

4th Gear

Joined: Aug 2002

Posts: 510

Likes: 0

From: Orange Park, Fl.

Yeah... some use 12% some use 14% !! There was a LONG post here on BHP vs WHP and the drive train loss percentage.. From my Dyno GUY ( HP Performance of OP ) he says the 14% is closer to reality... but I think it will take a engine Dyno to a Chassis dyno to get close.. We USE 14% !! Cool??

Just me..................................

Thumper