FS: Flat Blat 16x7 Rota Slipstreams
Apr 16, 2006 | 01:31 PM
Thread Starter
|
OVERDRIVE
Joined: Jul 2004
Posts: 9,390
Likes: 0
From: Bowie, MD
FS: Flat Blat 16x7 Rota Slipstreams
I bought these with the intent to use them for AutoX because they only weigh 13.9lb
. But my plans have changed and I don't need them
.
Flat Blat 16x7 Rota Slipstreams 56.1mm centerbore (to fit a MINI).
Locally delivered $450
Brand NEW.
Comes with carbon fiber look center caps and plastic centric rings if you use them.
Originally purchased from 18racing.com for $510.
Please email me
mdsbrain@hotmail.com or PM me
Apr 16, 2006 | 01:48 PM
Joined: Feb 2003
Posts: 1,725
Likes: 0
From: So. Maryland, USA
New or used?
Apr 16, 2006 | 03:51 PM
Thread Starter
|
OVERDRIVE
Joined: Jul 2004
Posts: 9,390
Likes: 0
From: Bowie, MD
Quote:
Originally Posted by kurvhugr
New or used?
Brand NEW. I have 3 still sealed in the boxes. I opened one to make sure I got the right ones.
Comes with carbon fiber look center caps and plastic centric rings.
I need to check the box for the offset. But they fit a MINI.
Apr 16, 2006 | 04:26 PM
Joined: Aug 2002
Posts: 6,555
Likes: 0
I have 'em...I love mine...they don't show brake dust!
Apr 16, 2006 | 05:13 PM
Joined: Oct 2004
Posts: 603
Likes: 0
I just was reading about this stuff:
Apr 16, 2006 | 05:43 PM
Thread Starter
|
OVERDRIVE
Joined: Jul 2004
Posts: 9,390
Likes: 0
From: Bowie, MD
Quote:
Originally Posted by MadHatter
I just was reading about this stuff:
Yes, an oversite. Thank you! I have corrected my post.
Apr 17, 2006 | 06:34 AM
Joined: May 2005
Posts: 3,348
Likes: 0
From: Everett, WA
Too bad they're 16s... They're smaller than my rotors.
Apr 17, 2006 | 11:49 AM
Thread Starter
|
OVERDRIVE
Joined: Jul 2004
Posts: 9,390
Likes: 0
From: Bowie, MD
Quote:
Originally Posted by Wagnbat
Too bad they're 16s... They're smaller than my rotors.
Why? Did you get a BBK?
Apr 17, 2006 | 12:07 PM
Joined: Feb 2003
Posts: 1,725
Likes: 0
From: So. Maryland, USA
Quote:
Originally Posted by Wagnbat
Too bad they're 16s... They're smaller than my rotors.
Hmmm, I have a BBK and my R-84s (16") fit.......
Apr 17, 2006 | 03:47 PM
Joined: May 2005
Posts: 3,348
Likes: 0
From: Everett, WA
Quote:
Originally Posted by mdsbrain
Why? Did you get a BBK?
Apr 17, 2006 | 03:55 PM
Joined: Sep 2005
Posts: 133
Likes: 0
From: Manassas
If I didn't just send Uncle Sam a big check today, I would own these.
Apr 17, 2006 | 05:36 PM
Joined: Jan 2006
Posts: 115
Likes: 0
From: Maryland
I'm looking for an autocross wheel - will they work with the JCW brakes?
Apr 17, 2006 | 05:52 PM
Thread Starter
|
OVERDRIVE
Joined: Jul 2004
Posts: 9,390
Likes: 0
From: Bowie, MD
Quote:
Originally Posted by WxSquid
I'm looking for an autocross wheel - will they work with the JCW brakes?
Hard to say for sure. According to MotoringFile a few sets of OEM 16" wheels will fit over the brakes. But I don't know what this is based upon to help in picking an aftermarket wheel.
http://motoringfile.com/2005/03/18/t...at_wheels_fit/
Apr 18, 2006 | 04:40 AM
Thread Starter
|
OVERDRIVE
Joined: Jul 2004
Posts: 9,390
Likes: 0
From: Bowie, MD
Anyone else locally interested? I have had a few requests to ship these but I would rather give them to someone locally.
Apr 19, 2006 | 04:50 PM
Joined: May 2005
Posts: 3,348
Likes: 0
From: Everett, WA
Quote:
Originally Posted by mdsbrain
Why? Did you get a BBK?
Ignore the big dent in the front below the scoop... And if you wonder where it came from, check the Mini Talk forum...
Attached Thumbnails
Apr 19, 2006 | 07:25 PM
Thread Starter
|
OVERDRIVE
Joined: Jul 2004
Posts: 9,390
Likes: 0
From: Bowie, MD
Quote:
Originally Posted by Wagnbat
Ignore the big dent in the front below the scoop... And if you wonder where it came from, check the Mini Talk forum...
I know what happened to the car
But its still one Bad@$$ MINI
I take it Tate finally understood how to assemble a shifter and the BatMINI is home again??
Apr 20, 2006 | 03:43 AM
Joined: May 2005
Posts: 3,348
Likes: 0
From: Everett, WA
Once I pointed to the loosening screws on the shifter. I told them over the phone to loosen the screws and adjust it up and down to match the one they took out.
Apr 20, 2006 | 03:56 AM
Joined: Jul 2005
Posts: 358
Likes: 1
From: metro dc
are they really 56.1 mm centerbore or are the plastic hubcentric rings
Apr 20, 2006 | 03:58 AM
Joined: May 2005
Posts: 3,348
Likes: 0
From: Everett, WA
He doesn't know, he never tried to put them on... So you have to do some research and find others who have them, or ask MDSBrain nicely to measure them. :P
Apr 20, 2006 | 10:29 AM
Joined: Jul 2005
Posts: 358
Likes: 1
From: metro dc
he shouldn't be claiming 56.1mm centerbore if hubcentric rings are required.
Apr 20, 2006 | 10:37 AM
Thread Starter
|
OVERDRIVE
Joined: Jul 2004
Posts: 9,390
Likes: 0
From: Bowie, MD
icubed I am just posting what they are. They have a 56.1mm centerbore from what I recall and came with rings. I need to remember to double-check the wheels @ home.
Apr 20, 2006 | 01:49 PM
Coordinator :: River City Minis
Joined: Feb 2004
Posts: 915
Likes: 0
MDSBrain if you havent sold them by 5/15/06 when i get paid .. you will =) but dont hold on to the on my account
Apr 21, 2006 | 03:53 AM
Thread Starter
|
OVERDRIVE
Joined: Jul 2004
Posts: 9,390
Likes: 0
From: Bowie, MD
All questions answered below. A pic of the side of one of the boxes.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ej
MINI Parts for Sale
12
Feb 20, 2016 02:16 PM
vetsvette
MINI Parts for Sale
6
Oct 11, 2015 06:05 PM
semibreve42
F55/F56 :: Hatch Talk (2014+)
13
Oct 2, 2015 09:06 AM
Levers_and_Gears
JCW Garage
0
Sep 28, 2015 04:42 PM
. But my plans have changed and I don't need them
.
