Category: Brakes
Price: $200
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R56
Location (Region): Texas
Item Condition: Brand New

I have a set of new front (redstuff) and rear (greenstuff) EBC pads and new drilled front and rear (JCW style) rotors for a Mini. I have an 08 Hardtop S and they did not fit but I'm stuck with them unless you buy them.

The pads were $180 and the rotors were $160. I'd like to get $250 for the whole setup.

The front pads are UD939
The rear pads are DP21389

 

The rotors are EBC too? The rotors didn't fit?

 

The rotors are not EBC, I can see how that could be implied.

The rotors match the pads, which have a smaller swept area than the ones on the car. The outer diameter is the same, but the hat on these rotors has a larger diameter than the ones on the car.

 

Looking at the boxes and pads you have in the picture those came from really old stock from years ago. I know for at least the last 5yrs all the EBC pads have come with the sensor slots, so those must be older than that.

 

These pads have the sensor slots in them. I somehow managed to only take pictures of the non-slotted side. If you want photos of the slotted side, let me know.

 

do you have a vendor name & part number on those rotors, and what state are you in?

 

Seperate ? I am looking for R56 S rotors and pads, why did the rotors not fit your car? are they non-s ?

 

Price down to $200, any takers?

ACallahan, I have an 08 R56 S and these didn't fit at all. The pads were not as tall as the ones that I purchased from Way Motor Works. The rotors and pads do seem to match each other and there was some feedback that maybe these are from an earlier incarnation of the R56. I'm not 100% sure what model they do fit, which is why I included the part numbers so that you could verify.