1st Gen Countryman (R60) Talk (2010-2015) R60 Countryman Discussions

R60 Timeline

Thread Tools
 
Search this Thread
 
Old Jun 13, 2012 | 08:42 PM
  #226  
pman81's Avatar
pman81
1st Gear
Joined: May 2012
Posts: 19
Likes: 0
From: Jacksonville, FL
Guess I'm in the opposite boat. I'm probably the only one to ever hope it takes longer for my All4 to get made and delivered -- I ordered it 2 weeks ago but can't take delivery until early-mid Sept (when I get home from my favorite 'stan country). It'll probably get done well before that, and I suppose it won't hurt it to sit in the dealer's lot for a few weeks, right?? I'm still going to check up on its status just like I was back home, though.
 
Reply
Old Jun 14, 2012 | 07:28 AM
  #227  
pdoel's Avatar
pdoel
3rd Gear
Joined: May 2012
Posts: 244
Likes: 0
From: Pittsburgh, PA
So, question for some of you who already made it completely through the stalking process. :D

I see a lot of you have dates for when it goes to paint, when it gets through final assembly, etc. Obviously, the online owner's lounge info really gives very little info. The Ask-Mini automated system seems to give the same info as online, but I kind of assumed (and maybe incorrectly) that when you speak to a rep, they have more info.

Is that the case? Or is your MA the one that normally gives that level of detail?

Mine went into production on 6/6, with an estimated completion date of 6/18. So I'm thinking mine should at least be finished with the pre-paint assembly and going into paint today or tomorrow. Was going to wait until the end of day today or tomorrow to call and speak to a rep, but then thought maybe they don't have all that info.
 
Reply
Old Jun 14, 2012 | 09:20 AM
  #228  
gleoncavallo's Avatar
gleoncavallo
1st Gear
Joined: May 2012
Posts: 11
Likes: 0
From: Jersey City, NJ
Originally Posted by gleoncavallo
We have just received word from our MA that our new (first) MINI will be ready fro pick-up next week!!

Have picked-up the following for her arrival:
- Glove box shelf from GoMiniGo
- Set of four mud flaps - OEM
- Rear bumper guard from gpracing

Now to research tinting shops.
Originally Posted by gleoncavallo
Our first MINI!

Mouse - All4, Cosmic Blue (body, roof, & mirrors), Auto, Premium, Tech, Cold, Nav, Panoramic Roof, Flat load floor / rear bench, Piano black cockpit & doors...

ORDERED 4/24/12.
PRODUCTION NUMBER 4/24/12.
PRODUCTION STARTED ?.
VIN received.
ESTIMATED COMPLETION DATE ?.
BODY SHOP ?.
PAINT SHOP ?.
FINAL ASSEMBLY ?.
BORN ?.
AWAITING TRANSPORT 5/16/12.
AT PORT 5/29/12.
LOADED ON VESSEL 6/5/12
SET SAIL EST 6/6/12 aboard the TURANDOT.
AT NEW YORK PORT ARRIVED 6/14/12 @ 11:30 AM ET.
AT VDC ?.
ESTIMATED DATE AT DEALER ?.
ON TRUCK ?.
AT DEALER ?.
PICKED UP EST 6/20/12.
Turandot has arrived at the dock in NYC - <1 week until we pick-up!!
 
Reply
Old Jun 14, 2012 | 04:09 PM
  #229  
TDNparts's Avatar
TDNparts
2nd Gear
Joined: May 2012
Posts: 112
Likes: 0
From: Long Island, NY
Smile

Quote:
Originally Posted by TDNparts
Countryman ALL4. Cold Weather, Sport Suspension, SR, Zenon w/ Blk housings, bench/flatload, arm rest, auto climate, blk headliner...

ordered May 25th.
rcvd. Prod # before I left the dealership
~ May 29th (OL site Sceduled for Prod. )
~ June 5th (OL site Scheduled for prod.)
June 5th: Automated system. (Awaiting transport to port of exit)
..called 3x to hear the good news LOL
June 7th. (OL site now updated as Awaiting Transport) (*OL site info is aprox 2 days behind the automated system info)
June 7th- Call Ask Mini- spoke w/ rep. Registered me into system, Verified status. Car was born/completed on June 4th I am still unable to obtain a VIN & am directed to further inquire for VIN, actual UK port info from my MA.
Apparently the MA has a different database. Also, Once the car reached the port, the ask mini database will have no further detailed info. (other than basic progress that appears on the OL site)
June 8th- AsK Mini Automated system says "At Port Awaiting to Load on Vessel"
- Call my MA today & got my VIN as well.
whoorah! now I can really track her, she's moving along quite fast

Its not loaded yet, so I cant accurately search vessel by vin.
but based on ports, it looks like it will ship on Monday 6/11 & arrive 9 days later on the 20th. Figure a few days at the center then 1 day transport to NY/dealer & then PDI. I might actually be able to redeem my Take down rebate. That would be amazing!
____End Quote______________


UPDATE 6/14
So, I spoke to ASK about 2 days ago.. no updates. I've been tracking & calling the automated system everyday only hearing the same msg. *awaiting departure

I thought I missed the 6/11 departure since there were no updates & its now the 14th.
WW vessel schedules showed the next departure (the Don Juan) leaving on 6/25 & arriving in NY/NJ on 7/5.
This wasnt so cool. I missed the opportunity to apply my Takedown Cert.. plus additional waiting.
Its been at he port since 6/7


As usual I called again today & got the same automated response. (at port awaiting departure) .

Good News!
Well as of about 2 mins ago I now have feedback from the WW tracking site.
My CMS4 is aboard the FLORIDA HIGHWAY & scheduled to arrive in NY (ETA 6/23)
hoooorah!
If all goes well thats just over a wk to get through the VDC & travel to NY from NJ & then PDI.
I just might be able to apply the Cert afterall.

The update was about 2 days later. It shows
Booked 12th(German timezone) Bremen
Rcvd at Termnal 6/13 Bremerheaven
Loaded on Vessel 6/13 Bremerheaven 23:00hrs


(The name of the Vessel changed, the departure was 1-2 days off, arrival is the same 2-3 days after the original schedule. (20 vs 23rd)
tracking doesnt show as Left Port or anything but I'll be sure to chk again later.)
 

Last edited by TDNparts; Jun 14, 2012 at 04:36 PM.
Reply
Old Jun 14, 2012 | 04:20 PM
  #230  
mare0114's Avatar
mare0114
1st Gear
Joined: May 2012
Posts: 44
Likes: 0
Doh.
 

Last edited by mare0114; Jun 14, 2012 at 04:28 PM. Reason: user error
Reply
Old Jun 14, 2012 | 04:27 PM
  #231  
mare0114's Avatar
mare0114
1st Gear
Joined: May 2012
Posts: 44
Likes: 0
Originally Posted by TDNparts

UPDATE 6/14
So, I spoke to ASK about 2 days ago.. no updated. I've been tracking & calling the automated system everyday.
I tought I missed the 6/11 departure since there were no updates
WW vessel schedules showed the next departure (the Don Juan) leaving on 6/25 & arriving in NY/NJ on 7/5.
This wasnt so cool. I missed the opportunity to apply my Takedown Cert.. plus additional waiting.


As usual I called again today & got the same automated response. (at port awaiting departure) .
Well as of about 2 mins ago I now have feedback from the WW tracking site.
My CMS4 is aboard the FLORIDA HIGHWAY & scheduled to arrive in NY (ETA 6/23)
hoooorah!
If all goes well thats just over a wk to get through the VDC & travel to NY from NJ & then PDI.
I just might be able to apply the Cert afterall.
Congrats TDN!! That must have been quite a nice surprise

Out of curiosity, does anyone know if there is a typical amount of time it generally takes a vehicle to get through the NY VDC and on its way to the dealership, or does it just depend on when there is a truck scheduled to go your way?
 
Reply
Old Jun 14, 2012 | 07:25 PM
  #232  
pdoel's Avatar
pdoel
3rd Gear
Joined: May 2012
Posts: 244
Likes: 0
From: Pittsburgh, PA
Originally Posted by mare0114
Out of curiosity, does anyone know if there is a typical amount of time it generally takes a vehicle to get through the NY VDC and on its way to the dealership, or does it just depend on when there is a truck scheduled to go your way?
Yeah, regardless of where it's going, it really just depends on how the stars align. Same with how long it takes to get from the factory to the port, and how long from the port to a ship. You could luck out and have it come out of the VDC and have a truck ready for your destination and leave that day. Or it could take a week.

That's the toughest part. The rest isn't all that bad to estimate.

Well, I got two nibbles on my Audi tonight, within 5 minutes of each other. Would be nice to sell it myself and not have to trade it in.

 
Reply
Old Jun 15, 2012 | 04:37 AM
  #233  
pdoel's Avatar
pdoel
3rd Gear
Joined: May 2012
Posts: 244
Likes: 0
From: Pittsburgh, PA
Called ask-mini (just went through the automated system) and my car is now in the body shop!!!


Originally Posted by pdoel
Here's mine. Not much so far. :D

Ordered: 6/2/12
Production Number: 6/2/12
Vin Assigned: 6/6/2012
Production Started: 6/6/2012
In Paint Shop: 6/15/2012
In Assembly: TBD
Completed: 6/18/2012 (Estimated)
Awaiting Transport: TBD
At the Port: TBD
On the Boat: TBD
Arrived U.S.: TBD
Arrived at Dealer: TBD
 
Reply
Old Jun 15, 2012 | 06:18 AM
  #234  
TDNparts's Avatar
TDNparts
2nd Gear
Joined: May 2012
Posts: 112
Likes: 0
From: Long Island, NY
Originally Posted by mare0114
Congrats TDN!! That must have been quite a nice surprise

Out of curiosity, does anyone know if there is a typical amount of time it generally takes a vehicle to get through the NY VDC and on its way to the dealership, or does it just depend on when there is a truck scheduled to go your way?
from the posts Im reading it appears to be btwn 2-4 days if everything is OK. If damage occured during transit or something wasnt up to par, then longer.

I'm hoping mine breezes through & gets to my dealer ASAP
 
Reply
Old Jun 15, 2012 | 08:38 AM
  #235  
imsachin's Avatar
imsachin
1st Gear
Joined: Jun 2012
Posts: 13
Likes: 0
Originally Posted by imsachin
I ordered mine on 5/28 and received a production number before leaving the dealership. It went into production on 5/30 but unfortunately seems to be stuck there. Mini owners tracking listed a VIN number on 5/30 but the options are blank. Ask mini says the completion date is 6/14 but I doubt that now since my MA says the options should appear on the order details screen when production starts.

This wait is excruciating!!
Yooo hoo! Mine is now showing production complete and has been released to the career.. awaiting transportation to the port of exit.

Hope to make it on the 6/24, DON JUAN. Anybody know how I can track in a little more detail? I have the VIN but don't seem to be able to search ont the WW site using that.
 
Reply
Old Jun 15, 2012 | 12:26 PM
  #236  
jasontom's Avatar
jasontom
3rd Gear
Joined: Sep 2011
Posts: 156
Likes: 0
From: Dallas, Texas
Originally Posted by pdoel
Called ask-mini (just went through the automated system) and my car is now in the body shop!!!

Hey pdoel,

Awesome news. I've been calling ASK MINI almost everyday. My car went into production on 6/5 with an estimated completion date of 6/19, but everytime I call and speak with someone they still only show in production. How do you get the juicy details like, paint, body, etc?
 
Reply
Old Jun 15, 2012 | 12:30 PM
  #237  
pdoel's Avatar
pdoel
3rd Gear
Joined: May 2012
Posts: 244
Likes: 0
From: Pittsburgh, PA
Well right now it's just saying it's in the body shop. So I assume that means paint. I actually got that info by calling the automated line. Last night it said it was in production, this morning it said it was in the body shop.

I did call to speak to a rep once they were open, just to see if they knew the actual dates, but they said they only can see the status, not the dates.

So I'd bet yours is soon to follow, if not there already.
 
Reply
Old Jun 15, 2012 | 12:33 PM
  #238  
jasontom's Avatar
jasontom
3rd Gear
Joined: Sep 2011
Posts: 156
Likes: 0
From: Dallas, Texas
Originally Posted by pdoel
Well right now it's just saying it's in the body shop. So I assume that means paint. I actually got that info by calling the automated line. Last night it said it was in production, this morning it said it was in the body shop.

I did call to speak to a rep once they were open, just to see if they knew the actual dates, but they said they only can see the status, not the dates.

So I'd bet yours is soon to follow, if not there already.
Thanks! So hard to be patient. Hoping we make the Fidelio on 6/29!
 
Reply
Old Jun 15, 2012 | 12:42 PM
  #239  
KingPagla's Avatar
KingPagla
2nd Gear
Joined: Jun 2012
Posts: 56
Likes: 0
From: Harlem, USA
I'm with pdoel!
AskMini tells me mine in the Body Shop too.
Also scheduled for the 18.
 
Reply
Old Jun 15, 2012 | 03:55 PM
  #240  
pdoel's Avatar
pdoel
3rd Gear
Joined: May 2012
Posts: 244
Likes: 0
From: Pittsburgh, PA
Sweet!

So now that it's getting closer, I figured I'd check the shipping schedule again. When I checked last week, it had 1 ship leaving on the 22nd, and two leaving on July 2nd. Now they show one leaving the 22nd, one on the 30th, and one on July 3rd. So even if I miss the 22nd (which I'm sure I will), I'd think I'd have a great shot for the 30th. With the date that one is scheduled to hit Baltimore, that would give it 12 days to get to my dealership before vacation, so definitely a possibility.
 
Reply
Old Jun 16, 2012 | 06:43 AM
  #241  
pdoel's Avatar
pdoel
3rd Gear
Joined: May 2012
Posts: 244
Likes: 0
From: Pittsburgh, PA
Ok, guess I was a little wrong. I figured that "body shop" meant paint. Yesterday ask-mini said it was in the body shop, today they say it's in the paint shop. So now I can officially say it's in the paint shop. :D
 
Reply
Old Jun 16, 2012 | 07:36 AM
  #242  
jasontom's Avatar
jasontom
3rd Gear
Joined: Sep 2011
Posts: 156
Likes: 0
From: Dallas, Texas
Originally Posted by pdoel
Ok, guess I was a little wrong. I figured that "body shop" meant paint. Yesterday ask-mini said it was in the body shop, today they say it's in the paint shop. So now I can officially say it's in the paint shop. :D

Hey guys. Looks like I am exactly one day behind both of you! I called ASKMINI just now and it says mine is in the body shop!!
 
Reply
Old Jun 16, 2012 | 07:39 AM
  #243  
TDNparts's Avatar
TDNparts
2nd Gear
Joined: May 2012
Posts: 112
Likes: 0
From: Long Island, NY
I also never got any OL or ASK updates regarding actual stage process (paint/body, etc)

I wonder how many MINI's come over on 1 vessel?
 
Reply
Old Jun 16, 2012 | 07:42 AM
  #244  
pdoel's Avatar
pdoel
3rd Gear
Joined: May 2012
Posts: 244
Likes: 0
From: Pittsburgh, PA
Originally Posted by jasontom
Hey guys. Looks like I am exactly one day behind both of you! I called ASKMINI just now and it says mine is in the body shop!!
Your Mini is like the annoying little brother that has to follow us everywhere!

:D

I think it's cool we all have one going through so close together. Never had this kind of experience before when ordering a car. While the wait sucks, going through it with other crazy stalkers definitely makes the process more fun!
 
Reply
Old Jun 16, 2012 | 08:47 AM
  #245  
KingPagla's Avatar
KingPagla
2nd Gear
Joined: Jun 2012
Posts: 56
Likes: 0
From: Harlem, USA
Originally Posted by pdoel
Your Mini is like the annoying little brother that has to follow us everywhere!

:D

I think it's cool we all have one going through so close together. Never had this kind of experience before when ordering a car. While the wait sucks, going through it with other crazy stalkers definitely makes the process more fun!


Yep mine is in the paint shop too.
Fidelio, here we come!
 
Reply
Old Jun 18, 2012 | 07:53 AM
  #246  
KingPagla's Avatar
KingPagla
2nd Gear
Joined: Jun 2012
Posts: 56
Likes: 0
From: Harlem, USA
Just got an email from my MA that my MINI has been built!!!!
Automated AskMINI still has it in the paint shop.
 
Reply
Old Jun 18, 2012 | 08:01 AM
  #247  
pdoel's Avatar
pdoel
3rd Gear
Joined: May 2012
Posts: 244
Likes: 0
From: Pittsburgh, PA
Hmmm. I'm guessing mine has probably been built too?

System still shows in the paint shop as well, but I know that can be a bit behind. But since we've been going through at the same time, I'd say it's safe to say we're sitting side by side right about now. :D
 
Reply
Old Jun 18, 2012 | 08:03 AM
  #248  
jasontom's Avatar
jasontom
3rd Gear
Joined: Sep 2011
Posts: 156
Likes: 0
From: Dallas, Texas
Originally Posted by KingPagla
Just got an email from my MA that my MINI has been built!!!!
Automated AskMINI still has it in the paint shop.
Awesome! I checked via the automated system and mine still shows in the body shop, completion date is still tomorrow!!
 
Reply
Old Jun 18, 2012 | 08:07 AM
  #249  
KingPagla's Avatar
KingPagla
2nd Gear
Joined: Jun 2012
Posts: 56
Likes: 0
From: Harlem, USA
She's in Barcelona today!
 

Last edited by KingPagla; Jun 18, 2012 at 10:49 AM.
Reply
Old Jun 18, 2012 | 08:08 AM
  #250  
gleoncavallo's Avatar
gleoncavallo
1st Gear
Joined: May 2012
Posts: 11
Likes: 0
From: Jersey City, NJ
Originally Posted by gleoncavallo
Turandot has arrived at the dock in NYC - <1 week until we pick-up!!
....now at distribution center....
 
Reply



All times are GMT -7. The time now is 10:58 PM.