1st Gear New members: make an initial post and introduce yourself as you shift from Neutral to First Gear. Current members: meet some of the new members.
Sponsored by:
Sponsored by:

How do I find out what my Production Week is?

Thread Tools
 
Search this Thread
 
Old Nov 30, 2005 | 03:59 PM
  #1  
Skyydiver's Avatar
Skyydiver
Thread Starter
|
1st Gear
Joined: Nov 2005
Posts: 18
Likes: 0
From: Austin, TX
How do I find out what my Production Week is?

Okay,
 
Reply
Old Nov 30, 2005 | 04:00 PM
  #2  
Skyydiver's Avatar
Skyydiver
Thread Starter
|
1st Gear
Joined: Nov 2005
Posts: 18
Likes: 0
From: Austin, TX
sorry about that...

Okay, maybe I am missing it in the Mini Lounge, but I am trying to figure out how to find out what my production week is.

Thanks,
Joe
 
Reply
Old Dec 1, 2005 | 07:20 AM
  #3  
Rowan's Avatar
Rowan
5th Gear
Joined: Nov 2005
Posts: 827
Likes: 0
From: Omaha -> Temecula
52 weeks in the year

Depending on when your car goes into production, you will HAVE TO join the support group for that week

Calendar showing weeks [Wno column]
 
Reply
Old Dec 1, 2005 | 07:24 AM
  #4  
dxturner's Avatar
dxturner
1st Gear
Joined: Nov 2005
Posts: 18
Likes: 1
Originally Posted by Skyydiver
sorry about that...
Okay, maybe I am missing it in the Mini Lounge, but I am trying to figure out how to find out what my production week is.
Thanks,
Joe
Your MA or 800.ASK.MINI are the best sources.
 
Reply
Old Dec 1, 2005 | 10:26 AM
  #5  
DrDiff's Avatar
DrDiff
Coordinator :: Northwest Indiana MINIacs
Joined: Nov 2004
Posts: 2,412
Likes: 0
From: Valparaiso, IN
OK some NINIetiquite help is needed here. You have a 20006 MINI on order.

MINI refers to the current car that is being built, Seen in the remake of TIJ (The Italian Job) with Marky Mark Walburg.

Mini or mini refers to the car from the 1950-1970's Smaller than your car. Seen in the original tij (the italian job), (and the pilot episode of MacGuiver) where they are killed at the end of the movie. :(

Note the capitalization of "TIJ for the remake and lowe case for original movie, just like the car.

Production week is measured from the time that they start to weld the chassis together on the production line. For a car to be cosidered week X it must be at the parking lot waiting to get on board a ship by end of shift on Friday of week X.

As stated before yourbest bet is you MA or 1 866 AskMINI. The Owners Lounge at MiniUSA.com is not up to date. Heck MIB was completely assembled and awating a ship before they even had it out of the paint shop!

I hope that this helps you. Enjoy the process of ordering a MINI. Mine should be over next Friday!
 
Reply
Old Dec 1, 2005 | 01:48 PM
  #6  
Ha-Z-Boy's Avatar
Ha-Z-Boy
1st Gear
Joined: Dec 2005
Posts: 15
Likes: 0
From: Puyallup, WA
I'm a little confused.

I just found out my MCS should be finished 12/7. Does this put me in production week 50?

-HZB-
 
Reply
Old Dec 1, 2005 | 05:16 PM
  #7  
Skyydiver's Avatar
Skyydiver
Thread Starter
|
1st Gear
Joined: Nov 2005
Posts: 18
Likes: 0
From: Austin, TX
Ha-Z-Boy...My estimated completion date is 12/5 so if I am understanding DrDiff correctly, you and I are a part of Production Week #50! Nice!
 
Reply
Old Dec 1, 2005 | 07:26 PM
  #8  
Ha-Z-Boy's Avatar
Ha-Z-Boy
1st Gear
Joined: Dec 2005
Posts: 15
Likes: 0
From: Puyallup, WA
Cool. Production Week #50 it is! Now I know which support group to join.
 
Reply
Old Dec 1, 2005 | 08:03 PM
  #9  
Ha-Z-Boy's Avatar
Ha-Z-Boy
1st Gear
Joined: Dec 2005
Posts: 15
Likes: 0
From: Puyallup, WA
Skyydiver,

After reading the completion dates stated in the various production week support groups, I think we might actually be in Production Week #49.
 
Reply
Old Dec 2, 2005 | 03:27 PM
  #10  
Skyydiver's Avatar
Skyydiver
Thread Starter
|
1st Gear
Joined: Nov 2005
Posts: 18
Likes: 0
From: Austin, TX
yeah...I am seeing the same thing. I used the calendar that Ravana sent and since my completion date is 12/5, that puts me in week 50. I am so confused at this point:impatient It is a challenge being blonde! Ha!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
Vendor Announcements
0
Aug 14, 2015 11:07 AM
ECSTuning
Vendor Announcements
0
Aug 12, 2015 01:24 PM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM
OutMotoring
Vendor Announcements
0
Aug 6, 2015 09:32 AM




All times are GMT -7. The time now is 06:24 PM.