FS:: New Curt Hitches and Trailer Accessories @ ECS Tuning
New Curt Hitches and Trailer Accessories @ ECS Tuning
ECS Tuning
Curt Trailers and Hitches for Your MINI Cooper Now at ECS Tuning
CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight.
Fits:
R50-F60 MINI Cooper (2002-2017+)
Click HERE For Hitches and More!
==========================================
==========================================
Curt Trailers and Hitches for Your MINI Cooper Now at ECS Tuning
CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight.
Fits:
R50-F60 MINI Cooper (2002-2017+)
Click HERE For Hitches and More!
==========================================
==========================================
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Hello, We have some listed for the r53. We have added more fitments then even Curt had based on peoples installs on NAM and elsewhere where they have found workarounds. The hitch sets on the bumper connection so no battery box to worry about. If Curt had an issue they did not have it fit in their system, based on a simple set up. But we all know MINI guys are inventive and find workarounds. 
All mods to make it work are noted in each product description.
R53 for example.
https://www.ecstuning.com/b-curt-tra...w11b16a-coupe/
All mods to make it work are noted in each product description.
R53 for example.
https://www.ecstuning.com/b-curt-tra...w11b16a-coupe/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
They dont list it because of those rear back up (pre 7/2004)or fog light ( add on post 7/2004) in this case. The MINI people here found workarounds.
https://www.northamericanmotoring.co...-question.html
https://www.northamericanmotoring.co...-question.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
3rd Gear
Joined: Dec 2013
Posts: 247
Likes: 20
From: Tucson, AZ
Thanks! My 05 S doesn't have a light there, just a black plug. I see that Curt used to list 05+ for fitment of the 11130, but then later changed it to 07+. Any idea why?
Does the black plug fit back in the hole when not using the hitch? Is the height just right to line up with the hole, or might I have to trim the bumper cover?
The 11126 is listed for the early non - S cars. Do you know why that doesn't fit the S? They both seem to have the same hole under the bumper.
Thanks again 😉
Does the black plug fit back in the hole when not using the hitch? Is the height just right to line up with the hole, or might I have to trim the bumper cover?
The 11126 is listed for the early non - S cars. Do you know why that doesn't fit the S? They both seem to have the same hole under the bumper.
Thanks again 😉
No problem.
If i remember right there was a slight change in the design. No the plug will have to be off, it protrudes. I guess you could make a clip or if you have plastic cutting skills cut out the old plug to fit around it. It would be very thin on the top and bottom of the plug.
They have a different angle and if I remember right more room to clear the OEM Cooper S exhaust.
If i remember right there was a slight change in the design. No the plug will have to be off, it protrudes. I guess you could make a clip or if you have plastic cutting skills cut out the old plug to fit around it. It would be very thin on the top and bottom of the plug.
They have a different angle and if I remember right more room to clear the OEM Cooper S exhaust.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Trending Topics
3rd Gear
Joined: Dec 2013
Posts: 247
Likes: 20
From: Tucson, AZ
Ok, as for the 11126 it kinda had to be the exhaust I suppose. I wonder why they don't make one version that fits both S and base? Maybe the spare on the base and the exhaust on the S impose competing design requirements.
On the 11130, the hitch protrudes out the hole a bit, but the height matches without enlarging the hole.... yes?
Thx again most helpful people!
On the 11130, the hitch protrudes out the hole a bit, but the height matches without enlarging the hole.... yes?
Thx again most helpful people!
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Interior/Exterior Products
0
Apr 3, 2018 02:44 PM
ECSTuning
Vendor Announcements
0
Apr 3, 2018 02:39 PM