R60 Rear Wheel Bearing Hub Assmbly
#1
R60 Rear Wheel Bearing Hub Assmbly - SOLVED
I could use a little help. I have been unable to find the torque specs for the four bolts that hold the rear wheel bearing hub assembly. The hex bolt head size, in socket measurements, is 18mm. These are the four bolts that hold the complete wheel bearing assembly to the car. I made the mistake of thinking the rear caliper bracket was held on like the front and just went to town taking bolts off. well, oops. So now I have two of the four bolts I need to re-torque.
thanks
kool-aide
thanks
kool-aide
Last edited by KoolAide; 03-14-2017 at 03:38 PM.
#4
Correct info from TIS
Hub to trailing arm: 100 Nm
(Torque crosswise like an X pattern)
Axle nut to hub: 182 Nm
And the bolts are not M10x35. They are M12x1.5x60 grade 10.9 with factory red loctite
Thread
Thread Starter
Forum
Replies
Last Post
NealDePape
R60 :: Countryman Talk (2010-2015)
6
05-07-2023 02:51 PM
R50/53 Front Drivers Wheel Bearing
CSIavarone
R50/R53 :: Hatch Talk (2002-2006)
3
08-27-2012 08:34 AM