Anyone running 235/40 tires on R56?
Anyone running 235/40 tires on R56?
So I have a set of 7.5 inch wide wheels for my 2008 Mini S and am currently searching for tires, I can probably get a good deal on a set of 235/40/17 tires, which will fit great on the wheel, but what I want to know is can I run them on my mini? I know some people have done it before, but I have not had a clear answer as to if it will rub or not. My wheel offset is 42, 7.5 inch wide. Right now my car is stock height, but I do plan on putting on H&R lowering springs soon after I get the wheels and tires mounted. Anyone run a similar setup? If not I'm just gonna play it safe and go with a 215/45/17. Thanks.
For the last 4 years I've been running 235/40/17's on my '13 JCW using rota rb wheels 17x7.5 with 45 offset and am lowered 2" with NO problems. I use sumitomo rubber that is dirt cheap and have provided excellent service. I use a 12.5 spacer in the front to clear the brakes but none in the rear.
ISAMIN
ISAMIN
For the last 4 years I've been running 235/40/17's on my '13 JCW using rota rb wheels 17x7.5 with 45 offset and am lowered 2" with NO problems. I use sumitomo rubber that is dirt cheap and have provided excellent service. I use a 12.5 spacer in the front to clear the brakes but none in the rear.
ISAMIN
ISAMIN
Ben
Got my wheels mounted today, and for the most part they fit very well. Offset is just where I want it to be. Only issue is the wheels rub on the fender liner at full lock, just barely grazes it.
Wheels
my wheels are 17x8.25 et 22 so it pokes about an inch on my car it did rob few times but the tires did the job and trimed
the arch from inside no more robbing but I have a YATT wide body on order that will help cover the tire after I install spacers
the arch from inside no more robbing but I have a YATT wide body on order that will help cover the tire after I install spacers


