Hi, All !!

I want to upgrade my front brake system, and I got some choices, like AP-

Racing, Wilwood, Alcon...

Which brand would you recommend ? If you don't have the budget limit.

 

The TarOx BBK system would be the uber upgrade!
http://www.tarox.com/en/grande.php

You can purchase the 10 piston configuration for the Mini here:
http://www.promini.com/product-exec/...arch_model/100

Here is the full kit with 10 piston fronts, rear rotors, pads, fluid.
http://www.promini.com/product-exec/...arch_model/100

 

thank you !!

that's great stuff.

 

Check out what TCE offers as well. The Wilwood kits offer some incredible performance as well. Don't forget Texas Speedwerks too.

Then again, is this for bling or are you going to track the car?

 

It depends on what wheels you are running as well. It looks like the TarOx needs at least 18". The TSWs will fit under some 16" wheels, I believe.

 

What about The Brake Man? Money is no object...these are the ones you want...

http://thebrakeman.com/bmw

http://thebrakeman.com/mini_cooper_s_03_

Email them for better prices.
Chris.

 

The tarox 10/6 piston from promini only needs 17 inch wheels (318 mm diameter rotors). I've poked around tarox for a bit and you can definitely order any size brake job under the sun from them... ($$$)

 

1st Tar-ox
2nd Brake Man
3rd KAD uk

Tar-ox, hot as hell brake systems!!

 

thank you for your opinion.

I would consider them seriously !!

how about the wilwood's products ? are they really good for MCS ?

My wheels are BBS RX 17".

 

As the most common Wilwood referenced vendor, I must mention that shipping costs may play a roll in you decision. I dug around a bit and I think you are in the UK. If that is so you can factor about $250-300 in shipping costs if a kit is purchased here in the USA and sent to you. While I'd be happy to help it's understandable if you choose to shop a more local market where you are.