I'm putting in my front swaybar an wondered if anyone could grab their Bentley manual and let me know what the torques are for the following bolts. As a long time VW guy I know I should have a Bentley manual myself but am waiting in vain for the '05 version to come out.

I am using Randy Webb's how to that can be found here:
http://store.webbmotorsports.com/for...wtopic.php?t=4

Here are the torques I need:

Swaybar to lower droplink:
3 16mm rear subframe bolts:
Rear A Arm mounting bolt: 44 ft/lbs?
13mm bolt on sterring knuckle:
2 16mm bolts to subframe under skidplate:
16mm subframe bolt behind each strut:
18mm swaybar bolts:

Thanks!

 

Swaybar to lower droplink: 56Nm - 41 ftlb
3 16mm rear subframe bolts:100NM - 74 ftlb
Rear A Arm mounting bolt: 44 ft/lbs? 100Nm - 74 lbft
13mm bolt on sterring knuckle: Pinch bolt 81Nm - 60 ftlb if this is what you are referring to.
2 16mm bolts to subframe under skidplate:Can't find a spec
16mm subframe bolt behind each strut:same as above.
18mm swaybar bolts:None given for swaybar mounting bracket. 56Nm - 41 ftlb for bar to link.

 

from TIS

12mm (thread size) bolts: 100 N-m (most of the bolts holding the subframe to the body and crush tubes) (12 places)
14mm (control arm mount to sub-frame) 165 N-m (4 places), (also holds stabilizer bar bushings)

10mm control arm bush to body: 59N-m then 90 degrees. (this is right out of TIS, but I didn't find it in Bentley)