I am about to install the stage 3 outmotoring ignition kit (with colder plugs) and a 15% SC pulley, I think I have everything figured out except the plugs. Should they be torqued to a specific setting or just reasonably tight? any input would be greatly appreciated.

Thanks in advance.

 

20 ft/lb

 

20 Ft. Lbs. Cold.

Use a good torque wrench and check them regularly. I change my oil every 5000 miles and use that time to check the plugs for tightness. There have been a bunch of folks that have had their plugs loosen and get ejected from the engine destroying the plug threads in the process.

Rich

 

Thank you very much!