How much brake line do I need

Reply Subscribe

Thread Tools

Search this Thread

Sep 28, 2024 | 12:01 PM

Apexlate

Thread Starter

2nd Gear

Joined: Jun 2018

Posts: 99

Likes: 23

How much brake line do I need

I want to replace rear hard lines from the joint on the drivers above the LCA back. I have about 18ft /216" of 3/16 cunickel tubing leftover from another project. Is that enough to do both lines?

Sep 29, 2024 | 05:30 AM

ernesto rex

1st Gear

Joined: Feb 2019

Posts: 25

Likes: 5

I would have some more on hand to be safe. Especially if you plan on doing this without unions mid car.

Sep 29, 2024 | 06:55 AM

Apexlate

Thread Starter

2nd Gear

Joined: Jun 2018

Posts: 99

Likes: 23

I think I found it in an old thread.

"driver's side is 2654mm long and the Pass. side is 2650mm long"
Sounds about right to me.

Sep 30, 2024 | 07:48 AM

ECSTuning

Platinum Sponsor

Joined: Jan 2013

Posts: 36,744

Likes: 2,542

From: Wadsworth, Ohio

yep, they have different end i believe ones is M10 and one is M12. Make sure you get the right bubble flare as you would have to make your own.

https://www.northamericanmotoring.co...placement.html

__________________