Going to replace valve stem seals... any other maintenance while I'm at it?
Thread Starter
|
1st Gear
Joined: May 2020
Posts: 21
Likes: 3
Going to replace valve stem seals... any other maintenance while I'm at it?
Hi all
I'm planning to replace the valve stem seals in about a week.
Are there any items I can replace as preventive maintenance?
(not going to remove the head)
My car is a 2009 base model with 46,000 miles on the clock
N12 engine, not turbocharged, not direct injected.
Thank you.
I'm planning to replace the valve stem seals in about a week.
Are there any items I can replace as preventive maintenance?
(not going to remove the head)
My car is a 2009 base model with 46,000 miles on the clock
N12 engine, not turbocharged, not direct injected.
Thank you.
Last edited by minitis; Nov 17, 2021 at 11:13 AM.
1st Gear
Joined: Sep 2021
Posts: 28
Likes: 6
From: Cambridge, England
Sensible things would include:
- Valve cover gasket
- Where fitted, O-rings on any of the components that you need to remove
- Where fitted, gaskets on any of the components that you need to remove
- The Vanos gear TTY bolts
You might want to consider replacing the thermostat housing and cross over pipe, goes beyond the area that you are working in, however both of these components fail at some point.
- Valve cover gasket
- Where fitted, O-rings on any of the components that you need to remove
- Where fitted, gaskets on any of the components that you need to remove
- The Vanos gear TTY bolts
You might want to consider replacing the thermostat housing and cross over pipe, goes beyond the area that you are working in, however both of these components fail at some point.
Thread
Thread Starter
Forum
Replies
Last Post
Jerry Phan
R56 :: Hatch Talk (2007+)
2
Sep 13, 2018 06:07 AM
JAB 67
R50/R53 :: Hatch Talk (2002-2006)
2
Sep 16, 2013 04:22 AM
