Everything is now sold. Thank you all for those pm's and especially those that have purchased my stuff.

 

pm sent for shelf

 

You have dibs on the shelf. Thanks.

 

pm sent for valve caps.

 

Thanks, pm replied.

 

picts added.

 

Basslink was sold... so no more picts.

 

Wonder if the exhaust would fit an 05 MCS? Thoughts?

 

The hanger orientation is different, I think from 04's onwards. You can either use only 2 of the 4 hangers (some members were doing this with no problem), or have the 2 hangers modified to fit...I would recommend the latter.

Still less than 1/2 the price of a new one.

 

Hey Taylor, Glenn at the shop can make it work for you.

 

thanks for the help AutoXCooper!

yah, i think any shop that can weld can make the Milltek
work on the 04's (i think) onwards...i think even Midas can.
not that im making fun of them or anything, they are muffler
and brake experts but i dont hear many MINI folks using
them.

it's the inner 2 hangers that need to be repositioned
to point sideways. mine are pointing aft.


since i didnt want the next person have to buy a new
gasket i didn't separate the rear section from the mid
pipe, but if you're going to have a shop install it they
can sell u a fresh gasket and so we can take the 2 sections
apart and make it easier to carry.

anyway, if you have a van or something that would be
much perferred. the thing is long and very difficult
to manuver inside the house in tight areas.

 

UPDATE ON THE ALTA INTAKE:

For those of you locals in the chicagoland area, if we can meet up
in Schaumburg, my offer is $80 cash - pending sale

 

I also found that i still had the driver side black bonnet stripe from CooperFlags. If you want it, let me know.

$10 local pickup schaumburg.

i replaced the passenger side long time ago so kept the
driver side.

 

Got a guy asking if my Alta intake for MCS would fit a MCSa. I don't see why not.

Anyone know?

Thanks.