SOLD! $200 Shipped! Brand new/Never installed (Originally $275 plus shipping/Detroit Tuned)

Disclaimer: This photo is from DT's website. The actual plates don't have the black powder coated appearance of these photos. It's basically unfinished bare metal. Bling factor is minor in this mod in that basically all you will see from the engine compartment is the adjustable bolts emerging from your strut tower.

"Here is a great set of adjustable camber plates for the Mini Cooper. These allow well over 3 degrees of negative camber for the front suspension at a very affordable price.
These plates have spherical bearings encased in urethane to offer some cushioning. These bearings are also replaceable unlike similar brands. These are for dual purpose cars that are street driven but are also used for track days and autocross. You can add negative camber for the track and adjust it back for street driving. They do not require drilling any holes and your strut brace will still fit. The bearings are easily replaceable. Ride height will be approximately same as with the factory bearing. These will work with factory springs or 2.5" ID springs and adjustable coil over systems like the Billstein PSS9."

 

Bump!

 

Will these work with Koni Sport shocks?

 

Since Konis are so widely used by MINIs, I wouldn't think there'd be a problem. There certainly wasn't anything on the Ireland site to indicate there would be...However, I've got a PM out to a buddy @ Tx Speedwerks who sells these & also runs Konis. I'll let you know what he says...

Meanwhile if anyone knows the answer for sure, feel free to chime in!

 

i run these camber plates with Koni Yellows and it works great.

 

Thank you, sir! Nothing better an experienced opinion (Hope the wedding went well! )

 

Sale Pending...

 

 

Sold