First, I'll admit I should have paid more attention.

Second, I replaced all the bulbs in the car with LED (deAuto, and programmed with bimmercode). Everything is peachy except the reverse lights.

Third, put my fluke on it and no power.

Fourth, the car just had the clutch done. I can't be 100 percent sure the reverse lights were working after they pulled the transmission, but no error codes on the dash that a bulb (or both) were out

I have done a ton of searching. Most say it is the switch on the transmission. One said that it was something in the footwell module that shut it down and it needed to be forced back on, but no details.

Help?

Thank you in advance!

 

It is the plug, found it unplugged in the engine compartment. Any idea where it goes on a R60? Doesn't seem to line up with the "take off the wheel and it's right there" of some of the other more documented models.

 

Found it, all fixed