Driver window switches not working
Thread Starter
|
Neutral
Joined: Mar 2021
Posts: 6
Likes: 2
Driver window switches not working
I have a 2013 Countryman S All4 and the drivers window switches and mirror control work off and on. I have gone through all the fuses and they are all good. The only thing I notice with it is that the right turn signal when you press it up and it gives you 3 blinks will stop working when the window control panel stops working. When it comes back on then the right 3 blinker works. Going full blinker to the right always works.
So I pulled the switch out of the door and it appears undamaged. The connector has a brown wire, orange and yellow wire, and a white and brown wire. Brown shows no power. Orange and yellow is getting 12 volts. White and Brown wire shows 3 volts and when i hit it with the reader the right blinker starts blinking. The next thing I was going to do was replace the window switch panel and see if that fixes things but the connection with the blinker makes me think that it wont fix things.
Any ideas or insight on this? Anyone else have this problem?
So I pulled the switch out of the door and it appears undamaged. The connector has a brown wire, orange and yellow wire, and a white and brown wire. Brown shows no power. Orange and yellow is getting 12 volts. White and Brown wire shows 3 volts and when i hit it with the reader the right blinker starts blinking. The next thing I was going to do was replace the window switch panel and see if that fixes things but the connection with the blinker makes me think that it wont fix things.
Any ideas or insight on this? Anyone else have this problem?
Neutral
Joined: Nov 2024
Posts: 2
Likes: 0
Same problem
I have a 2013 Countryman S All4 and the drivers window switches and mirror control work off and on. I have gone through all the fuses and they are all good. The only thing I notice with it is that the right turn signal when you press it up and it gives you 3 blinks will stop working when the window control panel stops working. When it comes back on then the right 3 blinker works. Going full blinker to the right always works.
So I pulled the switch out of the door and it appears undamaged. The connector has a brown wire, orange and yellow wire, and a white and brown wire. Brown shows no power. Orange and yellow is getting 12 volts. White and Brown wire shows 3 volts and when i hit it with the reader the right blinker starts blinking. The next thing I was going to do was replace the window switch panel and see if that fixes things but the connection with the blinker makes me think that it wont fix things.
Any ideas or insight on this? Anyone else have this problem?
So I pulled the switch out of the door and it appears undamaged. The connector has a brown wire, orange and yellow wire, and a white and brown wire. Brown shows no power. Orange and yellow is getting 12 volts. White and Brown wire shows 3 volts and when i hit it with the reader the right blinker starts blinking. The next thing I was going to do was replace the window switch panel and see if that fixes things but the connection with the blinker makes me think that it wont fix things.
Any ideas or insight on this? Anyone else have this problem?
duuude I got the same problem… what was the solution? The Foot module’?? Please help!!
Thread
Thread Starter
Forum
Replies
Last Post
bkurtz
1st Gen Countryman (R60) Talk (2010-2015)
4
Jan 24, 2025 09:46 AM
Mr. Incredible
Stock Problems/Issues
29
Jun 6, 2024 03:01 PM
painless_reck
R50/R53 :: Hatch Talk (2002-2006)
7
Oct 8, 2022 11:35 AM
Crimson Nape Racing
R56 :: Hatch Talk (2007+)
5
Jan 25, 2013 07:07 AM