Has anyone installed this on their Countryman?

I have a 2014 S and the instructions from Dinan show a different engine configuration. I tried the MAF and the Boost Sensor. The MAF is the right connector, but doesn't work the module (no green light). One side of the Boost works (and lights the LED red), but the other side doesn't fit.

Does this go on the MAP? I understand this to be on the throttle body, but don't know where it is, or how to get access.

Thanks for any help or advice. I bought it from ECSTuning, but they've not been helpful at all.

 

hello,

Sorry to hear they did not help you. But I can, the Dinantronic is only for the F60, (as well as the F54-F57 MINI gen 3 engines. 1.5L and 2.0L
https://www.ecstuning.com/News/MINI_Dinantronic_Elite_F54_F57_24989/

Dinan does not have one yet for the older Gen 2 MINIs yet.

The R60 s/JCW is the N18 engine, not the same engine and this is the tuner you will need. The NM Engineering Power module. NM.648856

https://www.ecstuning.com/News/MINI_N18_NM_Engineering_Tuner_25039/

Here is that install PDF for you.

http://www.nm-eng.com/media/attachme..._NM.648856.pdf


If you got it from us contact our CS team and let them know you want to exchange it and get the NM Engineering version. 1.800.924.5172

Always here to help and you can always PM me.

 

Burger Tuning also makes a module for the N18 engines: http://www.burgertuning.com/Mini_Coo...nce_tuner.html