R56 Sus-pension rusty
#26
Ball joints
Wheel bearings the bottom bolts were quite rusted in there but somewhat accessible the upper bolts are not so much.
I am assuming will also need to use a 13 mm socket with a swivel joint as there is not a straight reach because the bulge of prop shaft is in way?
Is there a better solution, there is not much room there.
I am assuming will also need to use a 13 mm socket with a swivel joint as there is not a straight reach because the bulge of prop shaft is in way?
Is there a better solution, there is not much room there.
Thread
Thread Starter
Forum
Replies
Last Post
pmsummer
General MINI Talk
1
12-11-2012 12:38 PM