I got my 2007 r56S 6speed in march, have been going through and fixing and changing stuff since I got it and love it!! One of the issues I had when I got it was no left turn signal, the lights worked with hazards though, my cruise control worked good and so did radio controls. So not knowing better I started at the stalk, well some research (after opening and removing the arm) I found the footwell module was a likely culprit, bad connection with the plug.... So I got a good clock spring/signal/light switch, installed it and everything worked on the stalks, but no CC or radio controls. Ive tried to calibrate the clock spring via videos I saw online with no luck, my schwaben nor Carly scanner/coders wont calibrate it either that I know of (hopefully I juat did something wrong with them) But I travel a lot and would love to get them working again. Hopefully without having to take Ole Karen to the dealer! *fingers crossed*

Ive checked wiring behind the airbag a few times, changed the actual buttons with good ones, checked fuses and still nothing.
Thanks for any suggestions!!