When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i had these made as I was not paying another $143 each.
Hi, i know this is a very old post. new to the group
mine has also faded off over the years, care to share how u guys replace this other than buying the whole set?
cause technically the blubs are still working, just the "decal" faded over time
doesnt make sense for me to change the whole thing
I'm gauging interest in having stickers created for the scuttles. My second revision looks like this. I am doing one more revision on this design to make them a bit more factory size & 'BAYSWATER' repositioned but will look close to this. Anyone interested? Cost will be ~$30 shipped for a pair, US only. The ones installed have a paint protection film for both UV protection and to add gloss. I can add this for an additional $10. Without the protection, they are like a vinyl bumper sticker. Matte. They will need to be cut manually. No commitment but will be having them made in the next week and probably another week for them to be produced. Let me know if you are interested.
Installation: I found that one you remove your old decal with an old credit card, there is a plastic blank behind it that can be popped out with a flat screwdriver. You then stick on the sticker to this, trim and replace.
I'm gauging interest in having stickers created for the scuttles. My second revision looks like this. I am doing one more revision on this design to make them a bit more factory size & 'BAYSWATER' repositioned but will look close to this. Anyone interested? Cost will be ~$30 shipped for a pair, US only. The ones installed have a paint protection film for both UV protection and to add gloss. I can add this for an additional $10. Without the protection, they are like a vinyl bumper sticker. Matte. They will need to be cut manually. No commitment but will be having them made in the next week and probably another week for them to be produced. Let me know if you are interested.
Installation: I found that one you remove your old decal with an old credit card, there is a plastic blank behind it that can be popped out with a flat screwdriver. You then stick on the sticker to this, trim and replace.
