R50/53 Pre vs post facelift engine and wireharness differences ????????
Pre vs post facelift engine and wireharness differences ????????
I'm wondering what's the difference between the 04 engine and wire harness vs the 06... my car is an 04' buuuut I tore into my engine awhile back and found it was not a matching numbers engine. Then I have run into a few fitment issues when it's come to ordering sensors and parts as I'm not 100% which model eng and harness I have.. I'm wondering becuase I purchased an alternator for an 04' mini s hardtop and I received my alternator and the power wires bolt and shaft are larger on the new one and tge new one has a plug with 2x prongs in it and my one on my engine has a connector with 3x prongs. So ofcourse the alternator didn't then fit. I also had ordered an 04 cranksensor and that too had a different style connector on it too.. I also ordered a pcv and again , that was different too.. and I specifically ordered all my parts for an 04 mcs that didn't fit.
Now, are the map sensors then pre vs post different part numbers and or the 02 sensors ? I'm wondering becuase I've had these fitment issues now and just wanna hopefully forsure somehow determine what year eng n stuff I have so that when I order my sensors and stuff in the future I make sure to get the exact/correct one needed...
any info you guys might have on this subject and the differences plz chime in..
Now, are the map sensors then pre vs post different part numbers and or the 02 sensors ? I'm wondering becuase I've had these fitment issues now and just wanna hopefully forsure somehow determine what year eng n stuff I have so that when I order my sensors and stuff in the future I make sure to get the exact/correct one needed...
any info you guys might have on this subject and the differences plz chime in..
Try putting your VIN number in this site: https://nemigaparts.com/cat_spares/etk/mini/
Maybe that will help track things down.
good luck!
Maybe that will help track things down.
good luck!
Try putting your VIN number in this site: https://nemigaparts.com/cat_spares/etk/mini/
Maybe that will help track things down.
good luck!
Maybe that will help track things down.
good luck!
Last edited by MiniManAdam; May 4, 2021 at 01:13 PM.
My R53 is an 06 that I got as a parts car with a blown motor. I got an 05 engine with harness (can’t confirm, was just told an 05) and installed it. Darn thing would barely start and would not stay running. Also had a bunch of dash lights and ignition acted weird.
Decided to put on the original 06 harness and everything runs perfectly. So there is some differences.
Decided to put on the original 06 harness and everything runs perfectly. So there is some differences.
My R53 is an 06 that I got as a parts car with a blown motor. I got an 05 engine with harness (can’t confirm, was just told an 05) and installed it. Darn thing would barely start and would not stay running. Also had a bunch of dash lights and ignition acted weird.
Decided to put on the original 06 harness and everything runs perfectly. So there is some differences.
Decided to put on the original 06 harness and everything runs perfectly. So there is some differences.
Thread
Thread Starter
Forum
Replies
Last Post
HotrodNetwork
R50/R53 :: Hatch Talk (2002-2006)
6
May 11, 2021 03:05 PM
kraigster414
R50/R53 :: Hatch Talk (2002-2006)
8
Jun 12, 2004 12:08 PM






