Needed to do some work on my car and I was just wondering if I can get the car into service mode without using jack stands. I'd just prefer to not go under the car if I didn't need to. I watched some videos and it doesn't look bad but I haven't tried so I was wondering if anyone had input on it.

 

Possible but difficult.
There's some plastic rivets in the wheel wells that are 1000 times easier to remove if you take off the wheels.

 

If you go and get some all-thread the same screw size as the bolts you can just slide out the front end and it rests there. Without removing the coolant lines you can get up to 6 inches. With coolant lines removed you can get as much space as you have rod. I have 1 foot rods with bolts and washers on the end to prevent the front end from coming off of the all thread.

 

Yes you can do it without jack stands.

 

Doable if you can squeeze under the front end a little..