R50/53 Moog swaybar end links always too big?
Thread Starter
|
3rd Gear
Joined: Oct 2018
Posts: 251
Likes: 15
From: Distant DC & Richmond exurbs of Virginia
Moog swaybar end links always too big?
So I found a Moog swaybar endlink on the driver's side of my MCS when replacing my struts. I have read many times over that they are too big but noticed no damage or rubbing to my CV Boot.
I then re-greased via the zerk fitting with Redline CV-2 and put it back on. No issues. Should I replace my passenger side end link with a Moog too or leave it alone? It was in good shape but is going to go eventually I'd assume.
Thanks.
I then re-greased via the zerk fitting with Redline CV-2 and put it back on. No issues. Should I replace my passenger side end link with a Moog too or leave it alone? It was in good shape but is going to go eventually I'd assume.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Drivetrain Front Tie Rod End Boots for R53
Manny_cooper
Drivetrain (Cooper S)
12
Mar 10, 2014 08:31 AM
flatblackmini
Stock Problems/Issues
2
Apr 26, 2012 05:15 AM