Here is my situation...I had an aftermarket seat installed in my car with a resistor in the connector and had no issues. Ive since then reinstalled the stock seat but i had to pull the wires out of the connector to fit the resistor and now cant sort out what order they are installed in the connector. I have a Bentley manual but cant find what im looking for. The wire colors from the harness coming out of the carpet are yellow&brown and the seat are violet/white and black/white. Right now its yellow to violet/white and brown to black/white. I still have an airbag light that my Schwaben tool cant clear. When hooked up the opposite of what i have now i got an airbag light and a DSC warning light. I listed for sale and need to get it sorted. Thanks!

 

Just checked mine. Stock seats in a 2003 MCS. yellow - black/white; brown - purple/white

I tried to take a photo, but they came out blurry. Hard angle to get it right.


blurry but you get the idea

Good luck with the sale,
Mike

 

Thanks! Just what i needed. I've tried swapping the wires back and forth but i cant clear the light or the code. My car hasn't had the passenger occupancy sensor recall done so I'm going to hit up my dealer. Could be I'm chasing more than one thing.