R50/53 Oil pan diy?
Thread Starter
|
2nd Gear
Joined: May 2011
Posts: 63
Likes: 0
From: Westlake Village, CA
Oil pan diy?
Welp,
It's about time, I cracked my oil pan on a nipple sewer in the road. Does anyone know the steps in replacing the oil pan and the gasket?
Could really use the help.
Thanks,
Eric
It's about time, I cracked my oil pan on a nipple sewer in the road. Does anyone know the steps in replacing the oil pan and the gasket?
Could really use the help.
Thanks,
Eric
Here:
http://r53minicooper.wordpress.com/2...s-r53-part-11/
This is what I used. Also a good idea to get a Bently Manual for this one; it's not difficult, but it is labor intensive and it takes a fair amount of time.
That link is from SooperCooper--great website for DIY links.
http://r53minicooper.wordpress.com/2...s-r53-part-11/
This is what I used. Also a good idea to get a Bently Manual for this one; it's not difficult, but it is labor intensive and it takes a fair amount of time.
That link is from SooperCooper--great website for DIY links.
Thread Starter
|
2nd Gear
Joined: May 2011
Posts: 63
Likes: 0
From: Westlake Village, CA
Here:
http://r53minicooper.wordpress.com/2...s-r53-part-11/
This is what I used. Also a good idea to get a Bently Manual for this one; it's not difficult, but it is labor intensive and it takes a fair amount of time.
That link is from SooperCooper--great website for DIY links.
http://r53minicooper.wordpress.com/2...s-r53-part-11/
This is what I used. Also a good idea to get a Bently Manual for this one; it's not difficult, but it is labor intensive and it takes a fair amount of time.
That link is from SooperCooper--great website for DIY links.
Thread
Thread Starter
Forum
Replies
Last Post
Kimolaoha
R56 :: Hatch Talk (2007+)
70
Jul 5, 2023 01:04 PM
R50/53 Mystery piece in oil pan
Darksilver06
R50/R53 :: Hatch Talk (2002-2006)
5
Sep 2, 2015 10:47 AM