R50/53 Cost on install
#2
Vaies widely depending on your area....
And if the shop has the mini specfic pully puller...
can be as little as a 6 pack and a pizza...
Or as much as 300$ plus parts in more $$ urban area....
Ask you local mini centric shop!! I have seen them done in 30 min or heard as lond as 2 hours or so of shoptime....so the experance of the installer plays a huge part. Also spend the $25 on a new, shorter belt, the similar amount on a tensioner stop, and jcw sparkplugs (same as s, but one step cooler).
Not knowing your location...
It is hard to speculate....
And if the shop has the mini specfic pully puller...
can be as little as a 6 pack and a pizza...
Or as much as 300$ plus parts in more $$ urban area....
Ask you local mini centric shop!! I have seen them done in 30 min or heard as lond as 2 hours or so of shoptime....so the experance of the installer plays a huge part. Also spend the $25 on a new, shorter belt, the similar amount on a tensioner stop, and jcw sparkplugs (same as s, but one step cooler).
Not knowing your location...
It is hard to speculate....
#3
Vaies widely depending on your area....
And if the shop has the mini specfic pully puller...
can be as little as a 6 pack and a pizza...
Or as much as 300$ plus parts in more $$ urban area....
Ask you local mini centric shop!! I have seen them done in 30 min or heard as lond as 2 hours or so of shoptime....so the experance of the installer plays a huge part. Also spend the $25 on a new, shorter belt, the similar amount on a tensioner stop, and jcw sparkplugs (same as s, but one step cooler).
Not knowing your location...
It is hard to speculate....
And if the shop has the mini specfic pully puller...
can be as little as a 6 pack and a pizza...
Or as much as 300$ plus parts in more $$ urban area....
Ask you local mini centric shop!! I have seen them done in 30 min or heard as lond as 2 hours or so of shoptime....so the experance of the installer plays a huge part. Also spend the $25 on a new, shorter belt, the similar amount on a tensioner stop, and jcw sparkplugs (same as s, but one step cooler).
Not knowing your location...
It is hard to speculate....
got a quote from Bay Bridge motors for $400, that was for pulley, belt & install.
Another place in Dublin said they can't install a pulley unless it was CARB legal, this was from a lady there, and I got their name from NAM which a few people recommended.
I like the Alta package and might add the crank pulley since they are in there anyways, but just not sure how much I should be paying. Don't want to get ripped off and pay more than I have to. Thanks.
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post
squawSkiBum
MINI Parts for Sale
15
10-02-2015 09:21 AM
Mini Mania
Drivetrain Products
0
08-21-2015 11:25 AM