Hi all,

Wondering is this (below) cable/adapter is the correct ISO9141 adapter for MTH remapping? Anyone want to sell (used/new)?

Thank you.


KKL / ISO 9141 Interface
- complete in one cable -

ISO - Norm
(ISO 9141 / KWP 2000)


-With this cable & the right software you are able to read/erase error codes and access all devices inside the car which are connected to the service bus. (Such as radio, airbag, dashboard, ABS, ECU, etc.) So it`s the perfect electronic diagnostic system to detect, locate and repair errors !
-Cable is based on certified ISO9141 Bus Transceivers and RS232 level shifters
-Connects to PC via RS232
-Because of it`s 2 K-Line`s it can also communicate with devices on 2nd K-Line on very new cars like latest Audi model`s
-Bi-Colour status LED`s for both K-Line`s
-Comfortable cable length of 2,00 metres, shielded cable connection to the computer
-works with VW, Audi, Seat and Skoda models from '95 and newer
by adapter (seperately available) also to the 2x2 socket of older VAG vehicles usable
-usable with Vag-Com, Cartune for BMW, Vehicle Explorer, Alfa8, ObdTacho
-with suitable software also Chiptuning over OBD are possible
-no software included

http://www.kds-online.com/Shop6a/cat...b4dd47c290e9d3