FS:: R60 Brembo JCW "GP2X" 6-Piston BBK - Calipers/Rotors Big Brake Upgrade
#1
R60 Brembo JCW "GP2X" 6-Piston BBK - Calipers/Rotors Big Brake Upgrade
Category: Brakes
Price: $2450
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R60
Location (Region): Midwestern
Item Condition: Used
Application:
- R60 Countryman (’11-‘16) – 5x120 lug, 79mm CB
Front:
- Calipers: OEM GP2/135i units - REFINISHED - OEM motif: Mold seams shaved, artwork is painted on using catalyzed urethane.
- Rotors: 2 x Centric High Carbon 125 Series 350 x 25mm - NEW - Dimpled in Brembo 32-row pattern
- Pads: 1 x Powerstop Z16 Evolution - NEW - Ceramic, low dust
- Brackets: Custom worked for the 350mm rotors and R60 spindle.
Rear:
- Calipers: OEM JCW units - REFINISHED - OEM motif: Custom vanity plate recessed and adhered (epoxy) with the artwork painted on (wet on wet for a chemical bond). Brackets: texture ground off the face and coated in a contrasting matte black.
- Rotors: 2 x Centric High Carbon 125 Series 296 x 10mm - NEW - Dimpled in matching Brembo 32-row pattern
- Pads: 1 x Powerstop Z16 Evolution - NEW - Ceramic, low dust
Notes:
- Selling as complete package only – This is the only one if its kind.
- Make sure your wheels will clear the front 6-piston units. Dust shields may need trimmed or removed to fit the massive front binders. You can use the GP2 template by matching up the OD’s of the two center bores.
- GP2 TEMPLATE
- Accessory items like lines, sensors, and fluids are not pictured or provided.
- **Ensure that your installer (if you're not a wrench) will install aftermarket parts.**
Last edited by CG1*; 02-11-2020 at 11:08 AM.
The following 3 users liked this post by CG1*:
#2
The following 3 users liked this post by I_Forge_KC:
#3
In my mind, every R60 should look like this ...
Incidentally, these have been moved to Ebay.
The following 3 users liked this post by CG1*:
The following 2 users liked this post by njaremka:
burton182boarder (02-26-2020),
stage1scott (04-18-2020)
The following users liked this post:
burton182boarder (03-10-2020)
The following users liked this post:
burton182boarder (06-24-2020)
#11
Again, I appreciate the compliments. I have some ideas in the pipeline. I just have a few gaps to bridge before I get started.
For anyone thinking about a kit like this, make sure you have around 2.5" between the back of your spokes and the outside rotor face. That means either running spacers or getting some big boy wheels mounted up.
For anyone thinking about a kit like this, make sure you have around 2.5" between the back of your spokes and the outside rotor face. That means either running spacers or getting some big boy wheels mounted up.
The following users liked this post:
I_Forge_KC (12-15-2020)
#16
They were. Until you had me ship them to Vermont. I just needed a good reason to finally finish this set.
Set #2 (Peep Show):
Set #2 (Peep Show):
Last edited by CG1*; 03-25-2021 at 07:51 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Billdone
R60 :: Countryman Talk (2010-2015)
1
10-10-2019 10:12 PM
BRracing
MINI Parts for Sale
4
02-08-2013 06:05 PM